Abstract:The critical cooling rate (Rc) calculated on the basis of the time-temperature-transformation (TTT) curve was taken as the intrinsic criteria of reflecting the glass forming ability (GFA) for the amorphous alloy. The TTT curves were plotted based on the isothermal Wheeler-Boettinger-McFadden (WBM) phase field method (PFM). By analyzing the TTT curves, the influence of different activation energy parameters E and Q for the interface mobility M and nucleation rate P respectively on Rc and GFA were investigated for Fe-25%B (mole fraction) binary amorphous alloy in present paper. The results showed that the activation energy E for the interface mobility M had litter influence on the nose temperature and time for the TTT curves. Under the different thermal activation energy Q1, Q2 and Q3 for the nucleation rate P, the temperatures and times corresponding to the nose tip were 500K, 600K, 775K and 6.2×10−4s, 4.5×10−4s, 9.5×10−4s, respectively, and the calculated values of Rc were 1.57×106K/s, 1.93×106K/s, 7.35×105K/s, respectively, which were in the range of 6.4×105 ~ 6.8×106K/s from the experimental measurements. Under the influence of thermal activation energy Q, the nose tip temperature increased, which meant Q controlled the nose tip temperature, while the higher Q would not get the perfect C shape. It was found that the values of Rc calculated based on the TTT curves by the PFM were in good agreement with the reported experimental values, which verified the feasibility of the glass prediction and the research of the intrinsic physical mechanism of the GFA by the PFM.

Evaluation of Glass-Forming Ability for Metallic Melts by Phase Field Approach

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Thermodynamic Modeling of Glass Formation in Metallic Glasses

Prediction of the Glass Forming Ability in a Fe-25%B Binary Amorphous Alloy Based on Phase-Field Method

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Calculation of Mechanical, Thermodynamic and Transport Properties of Metallic Glass Formers

Kinetic Approach to Determine the Glass-Forming Ability in Hf-Based Metallic Glasses

Phase Evolution and Glass Formation in an Fe-Based Alloy

Phase-field model of isothermal solidification in multicomponent alloys for multiple grains

Glass-forming ability determined from inter-atomic potentials for some miscible/immiscible binary metal systems

Glass-forming ability correlated with the liquid-liquid transition in Pd42.5Ni42.5P15 alloy

Strategy for Pinpointing the Best Glass-Forming Alloys

Prediction of the glass-forming ability of Fe–B binary alloys based on a continuum-field-multi-phase-field model

A New Criterion for Predicting the Glass-Forming Ability of Bulk Metallic Glasses

Glass Forming Ability of Metallic Glasses Evaluated by a New Criterion

Phase Field Simulation of Strain Glass Transition

A new criterion for evaluating the glass-forming ability of bulk metallic glasses

On the formation of metallic glass

On the New Criterion to Assess the Glass-Forming Ability of Metallic Alloys

Molecular dynamic characteristic temperatures for predicting metallic glass forming ability

Predictability of bulk metallic glass forming ability using the criteria based on characteristic temperatures of alloys