Abstract:Rail welded joint is one of weak links in high-speed railway, and its dynamic performance has important effects on the safety, stability, and comfort of the high-speed train. In this work, the dynamic mechanical responses at different regions of U75VG rail flash-butt welded joint were investigated. The results show that the base metal (BM), welding zone (WZ), and heat-affected zone (HAZ) of U75VG rail flash-butt welded joint has an obvious strain rate effect, i.e., the material strength increases with increasing the loading strain rate. The strength of WZ is similar to that of BM, but its toughness is much lower than that of BM. The toughness of HAZ is the same as that of WZ, but its strength is much lower than that of BM and WZ. Based on the experimental results, an improved dynamic constitutive model was established to reasonably simulate the stress–strain curves of different regions from quasi-static loading to dynamic loading. Finite element (FE) analysis of transient rolling contact between rail welded joint and wheel under different conditions was performed. Compared with the results from quasi-static wheel-rail contact simulation, the equivalent plastic strain at each region of rail welded joint increases significantly and presents non-uniform distribution after considering the dynamic effect. When the wheel contacts the junction between different regions, the impact will cause a significant stress concentration at the rail welded joints. The maximum wheel-rail load by the implicit dynamic analysis is about 4 ∼ 12 times that obtained by the quasi-static analysis. Moreover, the maximum contact pressure, equivalent stress and equivalent plastic strain of each area of rail welded joints gradually increase with the increase in axle load and driving speed.

Finite Element Analysis on Contact of Wheel and High Manganese Steel Crossing

Wear of a crossing under dynamic wheel impact

ANALYSIS STUDY ON BENDING FATIGUE TEST OF AUTOMOBILE WHEELS

FEA on the impact test of aluminium alloy wheel

Influence of material properties on the high-speed wheel-rail rolling contact behaviour

Investigation of transient wheel-rail interaction and interface contact behaviour in movable-point crossing panel

A finite element thermomechanical analysis of the development of wheel polygonal wear

Three-dimensional elastic–plastic stress analysis of wheel–rail cyclic rolling contact using finite element method

Fatigue crack growth in wheel-rail rolling-sliding contact: A perspective of elastic-plastic fracture mechanics criterion

Multiscale analysis of wheel-rail rolling contact wear and damage mechanisms using molecular dynamics and explicit finite elements

Coupling effects of strain rate and fatigue damage on wheel-rail rolling contact behaviour: a dynamic finite element simulation

Numerical investigation on wheel-rail impact contact solutions excited by rail spalling failure

Wheel Tread Wear Prediction of High-Speed Railway Train

Research on wheel–rail impact dynamics due to combined rail weld irregularities and polygonal wheel effects considering 3D contact geometry

Influence of Choosing Different Types of Elements on the Strength Analysis of A Wheel

A mathematically-based study of the random wheel-rail contact irregularity by wheel out-of-roundness

INFLUENCE OF CROSSING WEAR ON ROLLING CONTACT FATIGUE DAMAGE OF FROG RAIL

Finite Element Modeling of Interaction Between Non-Pneumatic Mechanical Elastic Wheel and Soil

Finite Element Analysis of a Wheel Based on the Wheel Dynamic Cornering Fatigue Test

Dynamic constitutive model of U75VG rail flash-butt welded joint and its application in wheel-rail transient rolling contact simulation

An elastic-plastic theoretical analysis model of wheel-rail rolling contact behaviour