Abstract:Added mass has significant effect on the vibration of membrane structures, which cannot be ignored during vibration analysis. Actually, the added mass of typical objects, such as cylinders and spheres, moving in fluid with acceleration have been widely investigated. However, research on the added mass of flexible structures is still limited. Although several numerical methods had been developed to investigate the added mass of flexible structures, the efficiency of the numerical methods is not verified by experiment tests. In this study, a framework to numerically analysis the added mass of open flat membranes has been established by using the Boundary Element Method (BEM). In order to evaluate hypersingular integral, the Stokes formula converting the surface integral to the curvilinear integral is used. Two added mass models are discussed, one only considering the effect of the membrane geometric shape, and another considering the effect of the geometric shape and the mode shape of membranes. Based on comparative analysis between numerical results and experimental results, it is shown that the added mass only considering the effect of geometric shape can agree well with the test results in low-order modes, however, the error will be increased as the order of vibration modes increasing. The added mass considering the effect of the geometric shape and the mode shape can have much better conformity with the test results both in low-order modes and high-order modes. The Modal Assurance Criterion (MAC) is used to compare the mode shapes of membranes vibrating in vacuum and in air. MAC values indicate that for uniform mass distribution of the membrane, there is little difference between the mode shapes of the membrane vibrating in vacuum and in air, while for nonuniform mass distribution of the membrane, the difference between the mode shapes of the membrane vibrating in vacuum and in air is little in low modes and is large in high modes.

Numerical Investigation on Added Mass of Circle Membrane Vibrating in Still Air

Numerical analysis of added mass arising from fluid flow induced by vibration of three-dimensional structure

Experimental Investigation on the Added Mass of Membranes Vibrating in Air

Numerical analysis of added mass for open flat membrane vibrating in still air using the boundary element method

Added-Mass Estimation of Flat Membranes Vibrating in Still Air

The Added Mass of a Biaxial Tensioned Membrane in Still Air

Simulation study on the structure of the added air mass layer around a vibrating membrane

An Efficient Numerical Shape Analysis for Light Weight Membrane Structures

Research on the Added Mass of Open-Type One-Way Tensioned Membrane Structure in Uniform Flow

Study on Applicability of Modal Analysis of Thin Finite Length Cylindrical Shells Using Wave Propagation Approach

Calculation of Added Mass of a Vehicle Running with Cavity

Numerical Investigation on Added Mass and Damping Force Coefficient of an Underwater Vehicle in Cavitating Flows

Numerical Studies of Added Mass Based on the CFD Method

Numerical Investigation on Fluid-Structure Interaction of Membrane Structure

Numerical simulation of flow-induced vibration on two circular cylinders in a cross-flow (Part I: Transverse y-motion)

Calculation of Finite Cylinder Radial Added-mass and Engineering Applications

Explanation for Fluid Effect on Flexural Vibration of a Finite Submerged Cylindrical Shell with Modal Added Mass

Numerical investigation of the added mass effect of submerged blade disk structures: From simplified models to Francis turbine runners

Numerical analysis and experimental study of membrane-type acoustic metamaterial plate with X-shaped pendulum arm and cylindrical mass blocks

Numerical and Experimental Studies on the Dynamic Equivalence of a Large Rectangular Membrane and a Grid Membrane

Experimental Study of Added Mass of the Thin-Walled Cylinder Structure