Abstract:Ni-based coating, as an excellent anti-corrosion material, is widely used in the petroleum field and has become a research hotspot in recent years. With the continuous progress of the petrochemical industry, especially in the carbon capture, utilization, and storage and enhanced oil recovery (CCUS-EOR) systems, Ni-based coatings face significant challenges. Based on the latest research status, this paper describes the influence factors of Ni-based coatings and the applicability of different Ni-based coatings. Research shows that CO2 and H2S are the key factors affecting corrosion. With the increase in CO2 and H2S content in the environment, the corrosion rate of carbon steel will be accelerated. When the CO2 content reaches a certain critical value, further increasing the CO2 content will reduce the corrosion rate. The corrosion mechanism of carbon steel under the combined action of CO2 and H2S was also analyzed. At a high CO2/H2S partial pressure ratio, the corrosion process is dominated by CO2 corrosion, and with the increase in the H2S/CO2 partial pressure ratio, the corrosion process shifts to H2S corrosion control. The application of Ni-P protective coatings in this corrosive environment has been investigated. A surface Ni-P coating is extremely hard, wear-resistant, and corrosion-resistant. It can withstand the corrosion of CO2, high salinity, and other media while preventing electrolyte penetration. It exhibits strong corrosion resistance in NaCl solution and can help prevent scaling. However, in the presence of CO2-H2s, it has been discovered that due to inherent faults in Ni-P, the corrosion phenomenon may be exacerbated by the action of H2S, and its protection ability has to be further investigated. The mechanical properties and corrosion resistance of the coating can be enhanced by adding particles to the coating, and four new coating systems, Ni-Fe-P, Ni-Cu-P, Ni-W-P, and Ni-W-P-nSiO2, were introduced. Finally, the future development focus and prospect of CO2 corrosion protection coatings under harsh conditions are prospected.

Research on the Co2 Corrosion Inhibitor Technology in Oil and Gas Fields

Research on Oil and Gas Field CO_2 Corrosion Protection Technology

CO_2 Corrosion and Protection Technology in Oil and Gas Field

Research Progress on C02/H2S Corrosion and Protection Technique in Oil and Gas Fields

Corrosion Status of Oil Well Pipe and Anti-corrosion Technology Development

Study on corrosion inhibitor technology in gas pipeline

Study of the Corrosion and Protection Technology of Oil and Gas Pipeline

Research progress on factors affecting oxygen corrosion and countermeasures in oilfield development

A comprehensive study on the effect of rock corrosion and CO2 on oil-water interfacial tension during CO2 injection in heavy oil reservoirs

Corrosion Inhibition Properties of Corrosion Inhibitors to under-Deposit Corrosion of X65 Steel in CO2 Corrosion Conditions

Progress in Corrosion Protection Research for Supercritical CO2 Transportation Pipelines

Experimental Evaluation of Anticorrosion of a Standard 20# Gathering Pipeline by Injecting Oxygen-Reduced Air into Simulated In-Service Wells

A review on corrosion inhibitors for high-pressure supercritical CO2 environment: Challenges and opportunities

Research on Evaluation of Corrosion Inhibitors for Oxygen Reducing Air Drive Gas Wells

Research progress of vapor phase corrosion inhibitors in marine environment

Research on Modern CO2 Absorption Process

Recent progress on the research of steel corrosion behavior and corrosion control in the context of CO 2 geological utilization and storage: a review

Research Progress of Organic Corrosion Inhibitors in Metal Corrosion Protection

Mechanism and anti-corrosion measures of carbon dioxide corrosion in CCUS: A review

Preparation of a Corrosion Inhibitor Preventing H2S Corrosion and Coupon Test

Progress in Research on Ni-Based Protective Coatings for Downhole Tubing Steel in CO2 Flooding