Abstract:Characteristics of aluminum alloys such as light weight, high strength-to-weight ratio and favorable corrosion resistance have brought about a bright application prospect in building structures. Wrought alloys are applicable to common beams and columns, while casting alloys can be fabricated as connectors in point-supported glass curtain wall and joints in spatial latticed structures on account of easy implement of moulding. Because of high strength, outstanding castability and remarkable mechanical properties after heat treatment, ZL111 in aluminum-silicon alloys is regarded as a desirable option. However, aluminum alloys are non-linear materials and their properties vary with casting and heat treatment modes. It is the well-marked distinction between aluminum alloy and ordinary carbon steel that special study on mechanical and fatigue performance is required. ZL111 raw materials were selected, with alloying agent and fabrication processes meeting the requirement of GB/T 1173-1995 standard. After T6 heat treatment process, test coupons were obtained by machining from raw materials. By utilization of electronic universal testing machine and cryogenic box, tensile tests at room temperature and low temperatures were performed. High-circle fatigue tests were carried out to obtain the fatigue performance of the material. Scanning electron microscope (SEM) was introduced to observe morphology of tensile and fatigue fractures. The tests revealed the relationship between mechanical property index and temperature, which indicated that the ZL111-T6 would increase in strength and plasticity. The microstructure of fractures validated and explained the macroscopic results. Furthermore, material strength at room temperature or low temperatures, stiffness and fatigue performance could satisfy bearing and normal serviceability requirement. Because of non existence of ductile-brittle transition temperature, superior corrosion resistance and outstanding castability, ZL111-T6 material is prone to fabricate complicated elements and joints withstanding cryogenic environment instead of carbon steel.

Low Resistivity Aluminium Alloy of High Tensile Strength and Elongation

Effect of Alloying Elements and Processing Parameters on Microstructure and Properties of 1XXX Aluminium Alloys

Enhancing the Strength of AlCrFeNi HEAs Via Tailoring Aluminum Content and Optimal Aging Treatment

Influence of Mg and Si content and heat treatment on electrical conductivity and hardness of AA6101 Al alloy

Alloying Elements Effects on Electrical Conductivity and Mechanical Properties of Newly Fabricated Al Based Alloys Produced by Conventional Casting Process

Study on Microstructure and Mechanical Properties of Al-Mg-Si-Cu Aluminium Alloy with High Ductility

A strong ferritic high‐resistivity multicomponent alloy with tunable ordered coherent multicomponent nanoprecipitates

Improved Tensile Strength and Electrical Conductivity of the Electrical Conductor Aluminum Alloy 6201

Mechanical and Fatigue Performance Tests of Cast Aluminum Alloy ZL111 Adopted in Structure

Microstructure and properties of a novel ultra-high strength, high elasticity and high plasticity Cu–20Ni–20Mn-0.3Nb-0.3Cr-0.1Zr alloy

Synchronously enhancing the strength, toughness, and stress corrosion resistance of high-end aluminum alloys via interpretable machine learning

Fabrication of hypoeutectic Al-4Si alloy with high electrical conductivity, high plasticity and medium strength by the dual treatment of Al matrix and eutectic Si microstructure

Co-doping of La/Ce and La/Er induced precipitation strengthening for designing high strength Al-Mg-Si electrical conductive alloys

Mechanical Properties of a Novel High-Strength Aluminum-Lithium Alloy

Internal friction and heat resistance of Al, Al–Ce, Al–Ce–Zr and Al–Ce–(Sc)–(Y) aluminum alloys with high strength and high electrical conductivity

High-Temperature Mechanical Properties and Microstructure of Ultrathin 3003mod Aluminum Alloy Fins

Design and preparation of aluminum alloy with high thermal conductivity based on CALPHAD and first-principles calculation

Development of the manufacturing process of aluminum alloys with high strength and conductance

A Study on High Strength, High Plasticity, Non-Heat Treated Die-Cast Aluminum Alloy

Effect of Al Content on the Microstructure and Properties of Zn-Al Solder Alloys

Microstructural evolution and properties of a Cu-Fe-Mn-P alloys with high strength and high conductivity