Abstract:Recent years have witnessed an increasing use of high strength aluminium alloys in structural applications, however, the mechanical properties of this type of materials are rather susceptible to elevated temperatures. This paper presents an experimental study on the mechanical properties of 7A04-T6 high strength aluminium alloy at elevated temperatures and after cooling down. Tensile coupon tests were first carried out on the specimens at high-temperature steady state conditions and post-fire conditions for temperatures ranging from 20 to 400 °C. The effect of cooling methods (cooled by air/water) was taken into account in the post-fire tests. Key mechanical properties, including Young’s modulus, yield strength, ultimate strength and ultimate strain, as well as the stress–strain responses obtained from both tests were fully reported and the microstructures of the post-fire material were examined. It is shown that the Young’s modulus and strengths decrease dramatically when temperatures are higher than 200 °C and the strengths decrease to less than 5% of the room temperature values at 400 °C, but a large proportion (up to 90%) of them regains after cooling down. In addition, the post-fire mechanical properties of the material exposed to 400 °C was found to be higher than those exposed to 300 °C; this was further explained through the microstructure examination. The test data were then utilised to assess the accuracy of existing codified design methods and the comparisons revealed that all of them provide inaccurate and scattered predictions. Finally, design formulae for the elevated-temperature retention factors as well as the post-fire residual factors and a two-stage Ramberg–Osgood material model were proposed. The design proposal was found to provide accurate predictions for the full-range stress–strain responses of the high strength aluminium alloy at both high-temperature steady state and post-fire conditions.

High-Temperature Mechanical Properties and Microstructure of Ultrathin 3003mod Aluminum Alloy Fins

Effect of Alloying Elements and Processing Parameters on Microstructure and Properties of 1XXX Aluminium Alloys

Influence of Zr Microalloying on the Microstructure and Room-/High-Temperature Mechanical Properties of an Al–Cu–Mn–Fe Alloy

High-Temperature Mechanical Behavior of an As-Extruded Al-5Zn-2Mg-0.3Cu (in wt.%) Alloy

Micro-alloying effects of Mn and Zr on the evolution of ageing precipitates and high temperature strength of Al-11.5Si–4Cu alloy after a long-time heat exposure

Heat-resistant Al alloys: microstructural design and microalloying effect

Enhanced thermal stability and mechanical properties of high-temperature resistant Al−Cu alloy with Zr and Mn micro-alloying

Microstructure and high temperature tensile properties of Al–Si–Cu–Mn–Fe alloys prepared by semi-solid thixoforming

Mechanical properties of 7A04-T6 high strength structural aluminium alloy at elevated temperatures and after cooling down

Ambient- and elevated temperature properties of Sc- and Zr-modified Al-6Ni alloys strengthened by Al3Ni microfibers and Al3(Sc, Zr) nanoprecipitates

Research on High-Temperature Constitutive Relationship of Aluminum Alloy

Microstructure and Mechanical Properties at Elevated Temperature of Powder Metallurgy Al-Zn-Mg-Cu Alloy Subjected to Hot Extrusion

High-Temperature Mechanical Behavior of Cobalt-Free FeMnCrNi(Al) High-Entropy Alloys

Achieving superior high-temperature mechanical properties in Al-Cu-Li-Sc-Zr alloy with nano-scale microstructure via laser additive manufacturing

Alloying effect of Mg on microstructure and mechanical properties at 300 °C of Al–5Cu–1Mn–0.5Ni heat-resistant alloy

Microstructure and properties of Al-4.8Cu-0.45Mn-0.19Cd-0.18Ti-0.17Zr-0.14V aluminum alloy extrusion bar

A Zr-45Ti-54Al-3V alloy with excellent elevated temperature mechanical properties: Millimeter-scale coarse grains with initial subgrains

Effect of ultrasonic melt processing and cooling rate on microstructure evolution of Al–Cu–Mn–Mg–Fe–Si alloy

Microstructural Evolutions and Strengthening Mechanism according to the Aging Temperatures of a High Si Cast Aluminum Alloy

Effects of solid solution temperature on the microstructure and properties of 6013 aluminum alloy

Effects of solution temperature on microstructure and mechanical properties of Al-Si-Mg aluminum alloy fabricated by wire-arc additive manufacturing