Abstract:Cementing is a key process in drilling engineering, and the cement sheath in cementing can sometime have problems such as significant brittleness, low toughness, and low resistance to impact damage, especially in perforation and fracturing environments where the cement sheath is more susceptible to damage. In response to the above issues, three types of inorganic carbon fibers, including 1 mm carbon fiber, 2 mm carbon fiber, and nanocarbon fiber, were studied indoors to investigate the influence of their ratios on the mechanical properties of cement paste. The optimal mixture of 1 mm carbon fiber, 2 mm carbon fiber, and nanocarbon fiber in a ratio of 3:2:1 was selected, and a multi-scale liquid fiber toughening agent BS-54 was obtained through special liquefaction process treatment. The liquid fiber toughening agent BS-54 has good water dispersibility and can evenly disperse in the slurry water, effectively improving the dispersion and addition of multi-scale fibers in cement slurry. The cement slurry prepared with multi-scale dispersed liquid fiber toughening agent has good rheological properties, water loss, and thickening properties. The addition of multi-scale dispersed liquid fiber toughening agent to cement slurry significantly increases the tensile strength, impact strength, and compressive strength of cement paste, effectively reduces the elastic modulus of cement paste, improves the strength of cement paste, and achieves toughening effect. Microscopic analysis shows that the active nanoparticles dispersed by multi-scale dispersed liquid fiber toughening agents can interweave between gaps, and the dense cross-linked structure formed by their multi-scale micro nano structure improves the toughness and strength of cement slurry. Moreover, the multi-scale dispersed liquid fiber toughening agent cement slurry ensures that the cement stone sample has good integrity under external impact, which is conducive to improving the impact resistance of the cement stone.

Laboratory Evaluation and Application of New Materials Based on Mud Cake to Agglomerated Cake (MTA) Method

Principle of Anti-Channeling Cementing Technology with MTA Method and Field Applications in Daqing/Shengli/Henan Oilfields

Effects of Curing Time and Mud Cake Modifier on Bond Strength of Cement-formation Interface

Mud Cake Improver Mul-GX with Lubrication and Interface Enhancement Effect and Its Action Mechanism

Effects of Typical Supplementary Cementitious Materials (SCMs) on the Bonding Property of Cement with Casing under Shallow Formation of Deep-Water Environment

Association Between Tuff Diagenesis and Mud Cake to Agglomerated Cake(mta)at Cement-Formation Interface

Mechanical and microstructural properties of cemented marine dredged clay with pre-hydrated ground granulated blast furnace slag

Experimental study on the factors affecting cement bond strength at the second interface of oil-gas well

Optimization on overall performance of Modified Ultrafine Cementitious Grout Materials (MUCG) and hydration mechanism analysis

Research and Experimental Application of New Slurry Proportioning for Slag Improvement of EPB Shield Crossing Sand and Gravel Layer

The influence of multi-scale tough liquid fiber toughening agent on the mechanical properties of oil well cement-based composite materials

Mechanical and microstructural properties of cement-treated marine dredged clay with red mud and phosphogypsum

Feasibility of integrated solidification and cementation of cementing fluid with mud cake from multifunctional drilling fluid

Formulation and properties of a new cleaner double liquid alkali-activated grouting material

Improving the Rheological and Mechanical Properties of Oil Well Cement Slurries Using Multiple Chemical Admixtures for Enhancing Zonal Isolation: A Laboratory Evaluation

Evaluation Method of Shale Water-Based Drilling Fluid Plugging Based on «Thick Mud Cake» Simulation

Effects of water-based drilling fluid on properties of mud cake and wellbore stability

Synergistic effect of PTB emulsion, CaCO3 whisker and Nano-SiO2 on the properties of cement-based materials

Performance improvement of nanocolloidal silica-aluminate cement composite grouting materials with organic acids

Preparation and evaluation of micro-encapsulated thermal control materials for oil well cement slurry

Experimental Study on the Effect of Polycarboxylate Superplasticizer on the Performance of Cement-Based Grouting Materials