Abstract:The excellent sound absorption performance of Sound Barrier which using Ceramic as Sound-absorbing Materials can be attributed to their corrosion resistance, lightweight nature, small particle size, and internal microporous structure. As a result, the application of new ceramic-based sound absorption materials in sound barriers is becoming increasingly widespread. To address the challenging issue of predicting the sound absorption and isolation performance of ceramic sound barriers and understanding the influencing factors on acoustic parameters, a simulation analysis method was employed for analyzing and studying various factors affecting the acoustic performance of these barriers. The calculation results demonstrate that increasing the thickness of both the sound absorption material and air layer behind exhibits similar effects on enhancing the sound absorption and isolation performance of ceramic acoustic barriers. Specifically, increasing either parameter leads to improved sound absorption performance by significantly increasing the sound absorption coefficient at 125Hz and 250Hz while decreasing it at 500Hz. However, in high-frequency bands above 1000Hz, structural parameters have minimal overall influence. Moreover, when keeping the thickness of ceramic sound absorption plates constant, every additional 20mm increase in air layer thickness behind results in a weighted increase in sound isolation by approximately 1dB; notable improvements are observed when this air layer thickness is below 1600Hz. When the thickness of the air layer behind is kept constant, an increase in the thickness of the sound absorption material by 10mm results in a 1dB increment in weighted sound isolation. However, when maintaining a total thickness of the sound barrier at 140mm, increasing the material's thickness leads to a reduction in air layer thickness. Consequently, there is a slight enhancement in the sound absorption coefficient at frequencies of 125Hz and 250Hz while a minor decrease occurs at frequencies of 500Hz and 1000Hz. The impact on other frequency bands and overall sound absorption performance remains inconspicuous. Moreover, variations in weighted sound insulation quantity have minimal influence on sound insulation characteristics.

Influence Analysis of the Parameters on Sound Absorbing Performance for Polymer Wool

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

Prediction of the Sound Absorption Performance of Polymer Wool by Using Artificial Neural Networks Model

Effect of Wool Fiber on Widening Sound Absorption Spectrum of Thin Microperforated Panel

Multiple Regression Analysis of a Woven Fabric Sound Absorber

Measuring Methods of Acoustic Properties and Influence of Physical Parameters on Natural Fibers: A Review

Airflow resistivity measurement and sound absorption performance analysis of sound-absorb cotton

Mechanical Parameters Effects on Acoustic Absorption at Polymer Foam

SOUND ABSORPTION PROPERTIES OF RECYCLED POLYESTER FIBROUS ASSEMBLY ABSORBERS

Study on Sound Absorption Properties of Fiber Materials and Perforated Components and Their Composite Structures with Different Structural Parameters

The Acoustic Behaviors of Dual Layered Nonwoven Absorbers: From Model Building to Experiment Verification

Investigation of Physical Properties of Polymer Composites Filled with Sheep Wool

Finite Element Solution for Dynamic Mechanical Parameter Influence on Underwater Sound Absorption of Polyurethane-Based Composite

Analysis and Optimization of the Noise Reduction Performance of Sound-Absorbing Materials in Complex Environments

Simulation Analysis of Influence Laws of Sound Barrier Acoustic Performance When Using Ceramic as Sound-absorbing Materials

Research Status of Sound Absorption Property of Porous Materials Made by Metal Fiber

The Influence of Microstructure on Sound Absorption of Polyurethane Foams Through Numerical Simulation

Parameter identification of sound absorption model of porous materials based on modified particle swarm optimization algorithm

Sound absorption coefficient analysis and verification of weft-knitted spacer fabrics for noise reduction application

Influences of the Ratio of Polyol and MDI on the Acoustic Parameters of Polyurethane

Acoustic performance of a multi-layer vehicle interior trim sound-absorbing material