Abstract:This study investigates the synthesis and characterization of composite materials, pigeon pea stem, and cotton fibers blended in different ratios such as 100/0, 70/30, 60/40, 50/50, 30/70, and 0/100. These composite materials were produced using a compression molding technique. According to ASTM standards, the acoustics, thermal conductivity, and physical characteristics of the composite samples were tested to assess their qualities. The impedance tube method detailed in ASTM E1050 was used to determine the sound absorption coefficients (SAC) for acoustics. The SAC values were measured at six frequencies such as 125, 250, 500, 1000, 2000, and 4000 Hz. The results showed that composite samples made from waste cotton and pigeon pea demonstrated sound absorption values of greater than 80%. Superior sound insulation and absorption, moisture absorption, fiber properties have also been demonstrated by waste composites. Especially, the waste cotton/pea stalk waste fiber composites achieved over 75% sound absorption, while the waste 28% composites performed well in terms of sound absorption, moisture absorption, and fiber properties. Even in humid conditions, the composite samples constructed from used cotton and pigeon pea stalks demonstrated good moisture resistance without reducing their insulating qualities. Soundproofing barriers are composite layers of foam or pigeon pea/cotton. 本研究研究了以 100/0、70/30、60/40、50/50、30/70 和 0/100 等不同比例混合的复合材料、木豆茎和棉纤维的合成和表征。这些复合材料是使用压缩成型技术生产的。根据 ASTM 标准,对复合材料样品的声学、导热性和物理特性进行了测试,以评估其质量。 ASTM E1050 中详述的阻抗管方法用于确定声学吸声系数 (SAC)。 SAC值是在125、250、500、1000、2000和4000Hz等六个频率下测量的。结果表明,由废棉和木豆制成的复合材料样品的吸声值大于80%。废旧复合材料也表现出了优越的隔音吸音、吸湿、纤维特性。特别是废棉/豌豆秆废纤维复合材料的吸声率达到75%以上,而废28%复合材料在吸声、吸湿和纤维性能方面表现良好。即使在潮湿的条件下,由用过的棉花和木豆秆制成的复合材料样品也表现出良好的防潮性,而不会降低其绝缘性能。隔音屏障是泡沫或木豆/棉的复合层。

Study on the Performance of Sound-Absorbing Fiber Materials for Vehicle

A study on the new PET composite sound-absorbing material applicable to automotive interior materials

Enhanced Sound Insulation and Mechanical Properties Based on Inorganic Fillers/thermoplastic Elastomer Composites

Preparation and Properties of Damping Materials in Multi-Phase System

Acoustic performance of a multi-layer vehicle interior trim sound-absorbing material

Utilizing Waste Cotton/Pigeon Pea Stalk Fibers Composites for Enhanced Sound Absorption and Insulation in Automotive Interiors

Vibro-acoustic analysis of sound-absorbing ducts using porous materials

Mechanic and Acoustic Properties of the Sound-Absorbing Material Made from Natural Fiber and Polyester

Investigation on Low-Frequency Sound Absorption Properties of PVB Micro-/Nanofiber Membranes

SOUND ABSORPTION PROPERTIES OF RECYCLED POLYESTER FIBROUS ASSEMBLY ABSORBERS

Research progress of piezoelectric polymer PVDF in sound absorption technology

Investigation on the Acoustic Absorption of Flexible Micro-Perforated Panel with Ultra-Micro Perforations

Sound absorption coefficients of porous sound absorbing materials composed of two types of fibers with different diameters

Optimizing Acoustic Performance: Electrospun Polycaprolactone Fiber Mat Associated with Melamine Foam and Fiber Glass Wool

Comprehensive noise reduction performance of polyurethane/ferroferric oxide/activated carbon fiber felt coated flexible composites

Research Progress on Sound Absorption of Fiber-Based Materials and Their Composites

Simulation, measurement and optimization of sound absorption in gradient impedance fiber-based composites

Improved sound absorption performance of synthetic fiber materials for industrial noise reduction: a review

Repercussion of Fiber Content on the Mechanical, Thermal, and Thermomechanical Properties of Natural Fibers Reinforced Thermoplastic Composites for Automotive Application

Progress on the Sound Absorption of Viscoelastic Damping Porous Polymer Composites

Analysis and Optimization of the Noise Reduction Performance of Sound-Absorbing Materials in Complex Environments