Abstract:The angle of repose and characteristics of the base stress distribution underneath granular piles serve as essential indicators in understanding the mechanical and packing properties of particle system. One counterintuitive phenomenon is that there is an evident dip of the base stress beneath the pile apex that might have implications in the design of granular pile facilities. The repose angle and stress dip are influenced by many categories of factors and exhibit different variations. Based on the localized source method, particle packing experiments were conducted to investigate the effects of funnel height, particle size, particle shape, and packing method on the repose angle and the vertical stress distribution of granular piles. The experimental results show that the repose angle of piles of irregular particle shape and higher funnel height is much larger, but there is a decreasing trend of repose angle with increasing particle sizes. The natural packing angles before and after the critical collapse of granular pile exhibits periodic variation. On the other hand, the stress dip phenomenon occurred in all granular piles constructed by localized procedure. An increase in funnel height and a middle particle size mitigate the stress dip to some extent, whereas irregular particle shape exacerbates it. Comparison of the results from different packing methods reveals that larger repose angle and more pronounced stress dip are observed in confined packing piles compared to that in free packing piles. Considering a growth rate of less than 5 %, the average vertical stress under the sand silo reaches saturation state. Moreover, the pressure on the silo wall increases with the height of silo pile but remains somewhat lower than predicted by the Ketchum equation and current design values.

Numerical Investigation on Angle of Repose of Cylindrical Particles

The Influence of Particle-Size Distribution on Critical State Behavior of Spherical and Non-Spherical Particle Assemblies

Particle Shape Effects on the Shear Behaviors of Granular Assemblies: Irregularity and Elongation

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

The Angle of Repose and Base Stress Distribution of Granular Piles: an Experimental Investigation

Investigation of Modeling Non-Spherical Particles by Using Spherical Discrete Element Model with Rolling Friction

Investigation techniques and physical aspects of the angle of repose of granular matter

Multi-level DEM study on silo discharge behaviors of non-spherical particles

Multi-super-ellipsoid model for non-spherical particles in DEM simulation

Comparative Study of Discrete Element Modeling of Tablets Using Multi-Spheres, Multi-Super-ellipsoids, and Polyhedrons

DEM Study of the Porosity Distribution of Pellet Sandpile Formed by Ternary Size Particles

Investigation of the compaction behaviour of sand-gravel mixtures via DEM: Effect of the sand particle shape under vibration loading

Packing of Cylindrical Particles: DEM Simulations and Experimental Measurements

Numerical simulation of fluid‐particle interaction in geomechanics using an extended CFD‐DEM approach with a super‐quadric model of non‐spherical particles

Influence of various DEM shape representation methods on packing and shearing of granular assemblies

Micromechanism study on the influence of particle deposition angle on mechanical properties of sand

Investigation of the Vibration Sorting of Non-Spherical Particles Based on DEM Simulation

Study on the Mechanical Behavior of Sands Using 3D Discrete Element Method with Realistic Particle Models

An investigation of the pressure dip phenomenon within conical sandpiles using CFD-DEM

Effects of angularity and content of coarse particles on the mechanical behaviour of granular mixtures: a DEM study

Investigation of the Behavior of Conical Piles of Granules and Powder