Abstract:The paper presents the results of an investigation into the kinetics of catalytic hydrogenation of vacuum residue at temperatures of 380, 400 and 420 °C and different durations, ranging from 30 to 70 min, using a nanocatalyst containing the active metals nickel and titanium supported on chrysotile. It was found that the yield of oils from 30 to 50 wt.% and tars from 12 to 18 wt.% increased with increasing temperatures and reaction times. A slight increase in the proportion of solids in the range of 2.0 to 6.0 wt.% is explained by the activity of the nanocatalyst used. In the study of the kinetics of vacuum residue hydrogenation, using the nanocatalyst developed by the authors, we were able to achieve a low yield of solids with a short contact time as well as a high yield of low-molecular-weight compounds such as oils and tars. To determine the kinetic parameters (rate constants and activation energies), Simpson’s integral method and a random search engine optimization method were used. High values of rate constants are characteristic of reactions in the formation of oils k1, tars k2 and asphaltenes k3 in the temperature range of 380–420 °C. The high values of the rate constants k1, k2 and k3 in the catalytic hydrogenation of the vacuum residue indicate the high reaction rate and activity of the nanocatalyst used. With an increase in temperature from 380 to 420 °C, the rate constant of the formation of gas products from vacuum residue and the conversion of asphaltenes into oils significantly increase, which indicates the accumulation of low-molecular-weight compounds in oils. The activation energy for reactions leading to the formation of oils, tars, asphaltenes, gas and solid products was 75.7, 124.8, 40.7, 205.4 and 57.2 kJ/mol, respectively. These data indicate that the processes of vacuum residue hydrogenation with the formation of oils and asphaltenes require the lowest energy inputs. Reducing the process temperature to increase the selectivity of the vacuum residue hydrogenation process when using the prepared nanocatalyst is recommended. The formation of oils at the initial stage plays a key role in the technology of the heavy hydrocarbon feedstock (HHF) hydrogenation process. Perhaps the resulting oils can serve as an additional solvent for high-molecular-weight products such as asphaltenes, as evidenced by the low activation energy of the process.

Molar Kinetics in Catalytic Hydrocracking of Asphaltenes

Catalytic Hydrocracking of a Bitumen‐Derived Asphaltene over NiMo/γ‐Al2O3 at Various Temperatures

Lumping Kinetics of Asphaltene Hydrocracking over Nimo/Gamma-Al2o3

Catalytic Cracking of Arab Super Light Crude Oil to Light Olefins: An Experimental and Kinetic Study

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Thermal Pyrolysis Kinetics of Asphaltenes from Several Crude Oils.

Kinetics and Product Distributions for Thermal Cracking of a Kerosene-Based Aviation Fuel

Non-isothermal Kinetics of Styrene—butadiene—styrene Asphalt Combustion

Investigation on asphaltene compositions and structures during hydroprocessing of low-temperature coal tar at different reaction temperatures on Ni–Mo–W/γ–Al2O3 catalysts

LUMPING KINETIC MODEL OF HIGH TEMPERATURE COAL TAR HYDROCRACKING

Hydrocracking of Polyolefin Thermal Cracking Waxes Over Ni-loaded Molecular Sieve Catalysts

Synergetic Regulation of the Microstructure and Acidity of HZSM-5/MCM-41 for Efficient Catalytic Cracking of n-Decane

Catalytic asphaltene upgrading under methane environment: Solvent effect and its interaction with oil components

KINETIC STUDY OF TAR CATALYTIC CRACKING OVER POROUS GRANULAR DOLOMITE CATALYST

Lumps and Kinetics for the Secondary Reactions in Catalytically Cracked Gasoline

Kinetic and reaction pathway of upgrading asphaltene in supercritical water

Calculation of the Rate Constants of Vacuum Residue Hydrogenation Reactions in the Presence of a Chrysotile/NiTi Nanocatalyst

Catalytic Cracking of Ketone Components in Biomass Pyrolysis Oil

Slurry-Phase Hydrogenation of Different Asphaltenes to Liquid Fuels on Dispersed MoS 2 Nanocatalysts

Study on the Deactivation Mechanism of HZSM-5 in the Process of Catalytic Cracking of N-Hexane

Slurry-Phase Hydrogenation of Different Asphaltenes to Liquid Fuels on Dispersed MoS2 Nanocatalysts