Abstract:A proton exchange membrane (PEM) fuel cell is one of the highly efficient hydrogen utilization devices. However, due to the complex physical and chemical processes in fuel cells, developing a mathematical model of the PEM fuel cell is challenging. In this study, a new coupled model based on the computational fluid dynamics method and a 1D model is proposed for the accurate and fast prediction of PEM fuel cell performance. First of all, the proposed model is validated using the literature data. It is then applied to simulate the distribution and evolution of the current density, hydrogen and oxygen mass fraction, and membrane water content in catalyst layer (CL). Results show that the increase in the current density is attributed to the increase in the consumption rate of hydrogen and oxygen and the increase in the membrane water content. In addition, the stabilized supply of the oxygen in cathode and the membrane water content in the anode CL are critical for the improvement of the fuel cell performance. For the cases studied in this research, when the output voltage decreases from 0.6 V to 0.3 V, the current density increases from 5738.1 A/m2 to 15171.2 A/m2. The average oxygen mass fraction in the cathode CL and the average membrane water content in the anode CL decreased by 42.3 % and 9.6 %, respectively. In addition, when the fuel cell starts up at 0.6 V, the concentration of hydrogen and oxygen drops gradually decreases along the flow direction of the CL, while the membrane water content rapidly increases initially, and then increases slowly, with the turning point around at approximately 2.2 x 10-3 m. Under the combined effect of hydrogen and oxygen concentration, as well as the membrane water content, the current density first increases and then decreases, with the maximum value exceeding 6500 A/m2.

A Dynamic Model with Material Properties for the Proton Exchange Membrane (PEM) Fuel Cells

Numerical Simulation of the Power Performance a Proton Exchange Membrane Fuel Cell under Dynamic Loading Conditions.

Modelling and Simulation System of Proton Exchange Membrane Fuel Cell

Dynamic Modeling and Simulation Analysis of Proton Exchange Membrane Fuel CellUsed by Car

Proton Exchange Membrane Fuel Cell(PEMFC) Lumped Modeling and Dynamic Performance Analysis

Modeling and Dynamic Response Simulation of Fuel Cell

Transient Response Research on Proton Exchange Membrane Fuel Cells Based on a Fully Validated Dynamic Multi‐phase Model

Understanding dynamic behavior of proton exchange membrane fuel cell in the view of internal dynamics based on impedance

A single-phase, non-isothermal model for PEM fuel cells

Modeling and Simulation of a PEMFC Based on the Dynamic Characteristics of Membrane

Study on the Dynamic Behaviors of PEMFCs with the Effect of the Interfacial Transfer Process

Numerical Simulation of Dynamic Behavior of Proton Exchange Membrane Fuel Cell

Numerical Analysis of Static and Dynamic Heat Transfer Behaviors Inside Proton Exchange Membrane Fuel Cell

Lumped Parameter Modeling and Simulation of Proton Exchange Membrane Fuel Cell

A Coupled CFD Model for an Accurate and Fast Prediction of the Unsteady Operation Process of a Proton Exchange Membrane Fuel Cell

Illustrative Case Study on the Performance and Optimization of Proton Exchange Membrane Fuel Cell

A Comparative Study of Equivalent Circuit Models for Electro-Chemical Impedance Spectroscopy Analysis of Proton Exchange Membrane Fuel Cells

A 1 + 1-D Multiphase Proton Exchange Membrane Fuel Cell Model for Real-Time Simulation

Modeling and Analysis of a PEMFC Power Generation System

Development Of A Multiphysical Multidimensional Modeling Of Proton Exchange Membrane Fuel Cell

Dynamic Fractional-Order Model of Proton Exchange Membrane Fuel Cell System for Sustainability Improvement