Abstract:A proton exchange membrane (PEM) fuel cell is one of the highly efficient hydrogen utilization devices. However, due to the complex physical and chemical processes in fuel cells, developing a mathematical model of the PEM fuel cell is challenging. In this study, a new coupled model based on the computational fluid dynamics method and a 1D model is proposed for the accurate and fast prediction of PEM fuel cell performance. First of all, the proposed model is validated using the literature data. It is then applied to simulate the distribution and evolution of the current density, hydrogen and oxygen mass fraction, and membrane water content in catalyst layer (CL). Results show that the increase in the current density is attributed to the increase in the consumption rate of hydrogen and oxygen and the increase in the membrane water content. In addition, the stabilized supply of the oxygen in cathode and the membrane water content in the anode CL are critical for the improvement of the fuel cell performance. For the cases studied in this research, when the output voltage decreases from 0.6 V to 0.3 V, the current density increases from 5738.1 A/m2 to 15171.2 A/m2. The average oxygen mass fraction in the cathode CL and the average membrane water content in the anode CL decreased by 42.3 % and 9.6 %, respectively. In addition, when the fuel cell starts up at 0.6 V, the concentration of hydrogen and oxygen drops gradually decreases along the flow direction of the CL, while the membrane water content rapidly increases initially, and then increases slowly, with the turning point around at approximately 2.2 x 10-3 m. Under the combined effect of hydrogen and oxygen concentration, as well as the membrane water content, the current density first increases and then decreases, with the maximum value exceeding 6500 A/m2.

Numerical Simulation of Dynamic Behavior of Proton Exchange Membrane Fuel Cell

Transient Computation Fluid Dynamics Modeling of A Single Proton Exchange Membrane Fuel Cell with Serpentine Channel

A Two-Dimensional Analysis of Mass Transport in Proton Exchange Membrane Fuel Cells

Numerical Simulation of Thermal-Hydraulic Characteristics in a Proton Exchange Membrane Fuel Cell

A 1 + 1-D Multiphase Proton Exchange Membrane Fuel Cell Model for Real-Time Simulation

Numerical Investigation of Transient Responses of a PEM Fuel Cell Using a Two-Phase Non-Isothermal Mixed-Domain Model

Three-dimensional Modeling of Transport Phenomena in Proton Exchange Membrane Fuel Cell with Different Fluid Channel

A single-phase, non-isothermal model for PEM fuel cells

A Three-Dimensional, Multicomponent, Two-Phase Model For A Proton Exchange Membrane Fuel Cell With Straight Channels

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

A Coupled CFD Model for an Accurate and Fast Prediction of the Unsteady Operation Process of a Proton Exchange Membrane Fuel Cell

Simulation of PEM Fuel Cells Using the Mixed-domain Model

Experimentally and Numerically Investigating Cell Performance and Localized Characteristics for a High-Temperature Proton Exchange Membrane Fuel Cell

Numerical Simulation of Three-Dimensional Gas/liquid Two-Phase Flow in a Proton Exchange Membrane Fuel Cell

Numerical Simulation of Proton Exchange Membrane Fuel Cells at High Operating Temperature

A three-dimensional mixed-domain PEM fuel cell model with fully-coupled transport phenomena

Transient Behavior of PEM Fuel Cells

Numerical Modeling and Simulation of Pem Fuel Cells: Progress and Perspective

Computational Fluid Dynamics Investigating Three-Dimensional Physical Characteristics in a Proton Exchange Membrane Fuel Cell

Numerical Simulation of Charge Transport in Proton Exchange Membrane Fuel Cells

Cfd Based Two-Phase Modelling of Proton Exchange Membrane Fuel Cell with Interdigitated Flow Field