Abstract:The transverse bending and axial compressing mechanical properties of carbon fiber reinforced plastic (CFRP) sandwich laminated square tubes with two kinds of cores, aluminum honeycomb and aluminum foam, respectively, were studied. The failure mechanism and damage processes of the two different CFRP sandwich laminated square tubes were studied by three-point bending and axial compressing experiments, comparing to CFRP hollow laminated square tube. The three-point bending process of CFRP sandwich laminated square tubes were also simulated in ABAQUS/Explicit and the failure mechanism and modes were deeply analyzed. The analytical model of composite laminated box beam using shear-deformable beam theory was extended to calculate the stiffness characteristics of CFRP sandwich laminated square tubes. The variation of bending, axial and shear stiffness in the linear elastic range were predicted. The results show that, after reaching the peak of three-point bending load, the bearing capacity of CFRP hollow laminated square tube reduced greatly due to the buckling instability of the two vertical sides, while that of the CFRP sandwich laminated square tubes were still considerable. A sudden strength damage occurred in the CFRP sandwich laminated tubes under the axial load, and the sandwich panels could slow down the drop of bearing capacity and increase the energy absorption. The load–displacement histories of numerical simulation and experimental result were in good agreement. The differences between analytically calculated and experimental measured stiffness characteristics were within 6.5%. The bending stiffness and axial stiffness of CFRP sandwich laminated tubes are large when the ply angle in the range from 0 to 45 degrees. Compared with the CFRP aluminum foam sandwich square tube, the specific stiffness and specific energy absorption of CFRP aluminum honeycomb sandwich square tube were higher but the energy absorbed was inferior.

Bending Response of Composite Sandwich Beams with M-Type Folded Cores

Bending Response of Carbon Fiber Composite Sandwich Beams with Three Dimensional Honeycomb Cores

Bending Response of Foldcore Composite Sandwich Beams

Compression Response of Sandwich Structure with M-Type CFRP Foldcore

Study on Transverse Shear Behavior of CFRP Sandwich Structure with M-Pattern Folded Core

Bending Behavior of Graded Corrugated Truss Core Composite Sandwich Beams

Bending Performance of Carbon Fiber–reinforced Polymers/aluminum Sandwich Structure with Different Forming Process and Analysis of Failure Mode

Three-point Bending of Physically Asymmetric Metal Sandwich Beams with Aluminum Foam Core: Failure Behavior and Optimal Design

Bending Performance of a Jute Fiber and Epoxy Resin Composite Sandwich Structure with a Bi-directional Corrugated Truss Core

Failure Analysis of Sandwich Beams under Three-Point Bending Based on Theoretical and Numerical Models

Three-point bending of sandwich beams with aluminum foam-filled corrugated cores

Mechanical Properties and Damage Failure of Carbon Fiber Reinforced Polymer Composite Sandwich Structure with Square Honeycomb Core Using the Interlocking Method

Research on Bending Properties of Metal Faced-composite Core Sandwich Panel

Transverse Bending and Axial Compressing Mechanical Characteristics of Carbon Fiber Reinforced Plastic Sandwich Laminated Square Tubes

The three-point bending responses of carbon fiber composite sandwich beams with Y-frame cores at high and low temperatures

Responses of Damage and Energy of Sandwich and Multilayer Beams Composed of Metallic Face Sheets and Aluminum Foam Core under Bending Loading

Experimental and numerical research on flexural behavior of fiber metal laminate sandwich composite structures with 3D woven hollow integrated core

The Failure Behavior of Double-Layer Metal Foam Sandwich Beams under Three-Point Bending

Analysis of deformation and failure mechanism of sandwich beams with lattice core under three-point bending load

Three-point bending behaviors of the foam-filled CFRP X-core sandwich panel: Experimental investigation and analytical modelling

Prediction and Experiment on the Compressive Property of the Sandwich Structure with a Chevron Carbon-Fibre-reinforced Composite Folded Core