Abstract:An optimization design was carried out based on a back propagation (BP) neural network and a genetic algorithm (GA) to improve the stiffness and accuracy of the self-developed MGK6030 five-axis tool grinding machine. First, finite element analysis was carried out on the whole grinding machine based on ANSYS Workbench, and the key parts were found to be the grinding wheel headstock, B axle box body, and column. Sensitivity analysis was carried out after the model parameterization, and ten parameters, which affect the quality, maximum deformation, and first-order mode, were obtained. These parameters were used as input variables. A total of 235 sets of sample data were obtained by using the optimal overall performance of the grinder for the target (large first-order natural frequency, small deformation, and mass). The BP neural network was then used to fit the nonlinear coupling relationship between the input and the output. Thereafter, the optimization function of the GA was used to perform multi-objective optimization in the specified range. Finally, the parameters are verified by software simulation and prototype test. Results showed that the maximum deformation of the optimized machine tool is reduced by 21%, and the first four order natural frequencies are increased by 6.36%, 9%, 6.4%, and 2.84%. The positioning accuracies of the linear axis and rotary axis are increased by 22% and 21%, respectively, which demonstrates the effectiveness of the optimization scheme and provides theoretical and technical support for similar optimization problems.

Optimum Design of Machine Tool Structures Based on BP Neural Network and Genetic Algorithm

Structural optimization of large part of machine tools based on BP neural network

Multi-objective Based Structure Optimization Design of Machine Tools

Dynamic optimization of large parts of machine tool based on BP neural network model

Optimization Design for the Bed Structure of Broach Grinder Based on FEM Analysis

Optimization Design Research of Machine Tool Column Based on Neural Network and Mesh Morphing

Dynamic Characteristics Analysis of Precision Linear Rolling Guide CNC Grinding Machine Tool’s Bed

Optimization of five-axis tool grinder structure based on BP neural network and genetic algorithm

Optimization Algorithm of PSO-BPNN Based on Extended T-S Fuzzy Model

Optimization Design of Structural Layout Based on Techniques of Artificial Neural Network

Analysis of Dynamics and Optimization Design of a CNC Machine Tool Bed

Structure Analysis and Optimization of Precision Grinding Machine Bed

Optimization Of Cutting Parameters By Coupling Neural Network Model And Genetic Algorithm

Optimal Design of Machine Tool Bed by Load Bearing Topology Identification with Weight Distribution Criterion

Optimal Sheet Metal Fixture Locating Layout by Combining Radial Basis Function Neural Network and Bat Algorithm

Optimization Method for the Bed Structure of Machine Tool Based on Mesh Morphing and Response Surface Model

Column Optimization of Compound Milling Machine Tool Based on GA-GRNN

On Optimizing Fixture Layout and Clamping Force Simultaneously Using Genetic Algorithm

Optimal Design of Grinder's Bed Structure Based on Dynamic Characteristics

Structure Analysis and Optimization for 5-axis CNC Grinder Bed

Structure Fuzzy Optimal Method in Design of Large-Sized Bed Based on Sensitive Analysis