Abstract:Machining characteristics were applied to topology optimization for machine tool structure design improvement in this study, and the goals of lightweight and high rigidity of the structure were achieved. Firstly, an ultrasonic-assisted grinding experiment was carried out on zirconia to investigate the surface roughness, surface morphology, grinding vibration, and forces. Then, the topology optimization analysis was conducted for structure design improvement, in which the magnitude of the grinding vibration was utilized as the reference for selecting the topology subsystems and the grinding force was used as the boundary conditions of the static analysis in the topology optimization. Hence, columns, bases, and saddles were redesigned for structure stiffness improvement, and the variations in the effective stress, natural frequency, weight, and stiffness of the whole machine tool were compared accordingly. The results showed that the deduced topological shape (model) can make the natural frequency and stiffness of the whole machine tool tend to be stable and convergent with a weight retention rate more than 75% as the design constraint. The subsystem structures with larger effective stress distributions were designated for stiffness improvement in the design. At the same time, the topological shape (model) was also employed in the design for weight reduction, focusing on minimizing redundant materials within the structure. In contrast to the consistency of the modal shapes before and after topological analysis, the sequential number of the modal mode of the machine tool model after topological analysis was advanced by two modes relative to those of the original situation, which means the original machine tool may be out of its inherently resonant frequency range. Also, the natural frequencies corresponding to each mode had an increasing tendency, and the maximum increase was 110.28%. Furthermore, the stiffness of the machine tool also increased significantly, with a maximum of 355.97%, leading to minor changes of the machine tool’s weight. These results confirm that the topology optimization based on machining characteristics proposed in this study for structure redesign improvement and stiffness enhancement is effective and feasible.

Research on Multi-objective Optimization of Machine Bed Based on Sensitivity Analysis

Multi-objective Based Structure Optimization Design of Machine Tools

Machining Parameter Optimization of Milling Process Based on Uniform Design

Sequential Optimization Design Research on Rear Mould Board of Injection Machine

Analysis and structural optimisation of bed structure for CNC lathe based on modal strain energy sensitivity

Multi-objective Optimization Method of Spatial Flexible-Component Based on Orthogonal Tests

Dynamic analysis of lathe bed of woodworking CNC machining center based on the modeling of joint surface

Dynamic Characteristics Analysis of Precision Linear Rolling Guide CNC Grinding Machine Tool’s Bed

Dynamic performance analysis and optimization method of the horizontal machining center based on contact theory

Multi-objective optimization design for the table of a CNC machine tool based on bionic structures

Multi‐Objective Optimization for the Cross Brace of a Computer Numerical Control Gantry Machine Tool Based on Intelligent Algorithms

Structure Design Improvement and Stiffness Reinforcement of a Machine Tool through Topology Optimization Based on Machining Characteristics

Light Weight Design of a Machine Tool Based on Sensitivity Analysis

Research on Optimization of Face Gear Grinding Machine Structure Design Based on Dynamic Performance of Machine Tool

Multi-Objective Optimization of Yokeless and Segmented Armature Machine for In-Wheel Traction Applications Based on the Taguchi Method

Structural Design and Optimization of the Crossbeam of a Computer Numerical Controlled Milling-Machine Tool Using Sensitivity Theory and NSGA-II Algorithm

Multi-objective Optimization on the Body Structure of Integral Bus

Data-mechanism-driven Product Performance Optimization with Multiple Parameters under Uncertainties in Manufacturing Automation Systems

Research on Optimization of Height Difference of a Precision Horizontal Machining Center

Multi-objective performance optimal design of large-scale injection molding machine

Analysis of Multi-Objective Optimization of Machining Allowance Distribution and Parameters for Energy Saving Strategy