Abstract:Track structures are apt to generate degradation under repeated loading of train traffic. Avariation of support stiffness is one of the main degradations, such as unsupported sleepers and the transition position from embankment to a bridge, which occurred frequently. The service performance of track will decline including the comfort index of passengers and the safety of train in these areas. In order to understand the control standard of track stiffness variation, various models have been used to analyze the amplification of dynamic responses of track by researchers. The coupling effect of train and track structure was considered unnegligible in some researches. In this paper, an updated numerical model is developed based on track dynamic theory, in which the CA mortar and concrete base are both taken into consideration. The results were compared with the finite element model ( FEM) results based on ABAQUS software, in which the train loads are assumed as a series of constant loads. From the comparison, the influence of train-track interaction was presented. When the track has no irregularity or degradation, the wheel-rail contact loads are nearly constant, and the dynamic responses of track structure are the same in these two models. But if there are track stiffness variations,the results in train-track interaction model are larger than that in FEM,which means that the train-track interaction has an intensive effect. Besides the differences of track responses, the FEM cannot reveal the variation of contact forces and train responses, which are also essential to summarize the control standard of track degradation. At last, based on the train-track interaction model, various conditions of track stiffness variation are analyzed and discussed.

Finite Element Analysis of Static Characteristics of a Hydrostatic Guideway and Its Effect Factors

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Theoretical Research on Aerostatic Rectangular Guideways with Finite Difference Method

Modeling, simulation and experiment for straightening lateral bending of elevator guide rail

Residual Stress Distributions in Elevator Guide Rail Straightening

STATIC STIFFNESS RESEARCH AND OPTIMIZATION ON A HYBRID MACHINE TOOL CONSIDERING THE STIFFNESSES OF BEARINGS AND GUIDEWAYS

Finite element model for static characteristic analysis of rolling linear guide

Investigation of static characteristics for linear rolling guide with considering geometric errors

Finite Element Analysis of a Flexible Ferris Wheel

Influence of multisource errors of oil film contact surface on motion accuracy of hydrostatic guideway

Analysis of the Vertical Stiffness of Rolling Guide That Involves the Elastic Deformation of Carriage Skirt

Dynamic Characteristics Analysis of Precision Linear Rolling Guide CNC Grinding Machine Tool’s Bed

Effect of combined geometric errors on static load distribution and deformations for linear rolling guide

Study on the Influence of Micro-Features in the Surface Topography of the Slider Raceway on the Dynamic Friction Factor of the Guide Rail Pair

Research on nonlinear static and dynamic characteristics of linear guideway in machine tools considering carriage flexibility

Thermal characteristics analysis of hydrostatic lubrication of involute spline guideway

Analysis on the Individual Stiffness of the Aerostatic Guide Way and Error Sources of Its Vibration

Static and dynamic characteristics of large-span six-slider closed hydrostatic guideway considering pitch moment and yaw moment

Investigation on lubrication characteristics and deformation control of hydrostatic bearing workbench

Dynamic Characteristics of Linear Rolling Guide Joint Based on Contact Stiffness

Study on static rigidity of a high-speed vertical machining centers named VH1100