Abstract:The present study presents an attempt to modify the surface properties of macroporous resins (MRs) in order to improve anthocyanin adsorption and desorption from Pyrus communis var Starkrimson fruit peel extract. A number of MRs were tested to optimise the ultrasonic-assisted adsorption (UAA) conditions; including ultrasonic power (100-400 W), resin-to-extract ratio (1-3 g/50 mL) and temperature (20-40 degrees C). Similarly, varying ultrasonic-assisted desorption (UAD) conditions were optimised; including ultrasonic power (200-600 W), resin-to-solvent ratio (1-4 g/50 mL), ethanol concentration (60-90% v/v) and temperature (20-40 degrees C). The Amberlyst 15 (H) cationic resin was found to be superior to the other tested resins. The maximum adsorption capacity (659 mu g/g) of cyanidin 3-galactoside (Cy 3-gal) was achieved under the optimised UAA conditions (400 W, 20 degrees C and 1 g/50 mL), while 616 mu g/g of Cy 3-gal was recovered under the optimised UAD conditions (582 W, 1 g/50 mL, 60% and 20 degrees C). Moreover, titratable-acid and total-sugar contents were found to be significantly lower under UAA than under conventional-assisted adsorption (CAA). ANOVA revealed that process factors had significant effects on the Cy 3-gal purification, as depicted by their linear, quadratic and interactive effects. While anthocyanin adsorption was found to be significantly improved at lower ultrasonic power, higher power promoted the desorption process. Adsorption under optimized UAA conditions followed pseudo second-order kinetics and multilayer adsorption (Freundlich isotherm) onto the Amberlyst 15 (H) resin surface was observed. The particle-size distribution curve and scanning electron microscopic images also revealed higher resin-surface roughness, peeling and the appearance of pores on the surface under ultrasonication. This is the first study to use ultrasonication to modify a cationic exchange resin for the improvement of Cy 3-gal purification from a fruit extract. This study can recommend the use of ultrasonication as a low-cost green technique that can improve macroporous resin characteristics for better purification of compounds from an extract

Chloromethylation Research of LX-1180 Macroporous Adsorption Resin in Ultrasonic Environment

Ultrasonic-assisted Modifications of Macroporous Resin to Improve Anthocyanin Purification from a Pyrus Communis Var. Starkrimson Extract

EFFECT OF LONG CHAIN CATIONIC SURFACTANT ON ZSM-5 SYNTHESIS AND METHANOL TO OLEFIN REACTION

Synthesis of Chloromethylated Poly(Ether-Imide) with Different Substitution Degrees

Methylation of softwood and hardwood kraft lignins with chloromethane

Investigation of indirect chloromethylation for SEBS

Synthesis and properties of a novel crosslinked chitosan resin modified by l-lysine

Studies on the Epoxidation of Methallyl Chloride over Ts-1 Microsphere Catalysts in A Continuous Slurry Reactor

Chloromethylation of SBR under Micellar Catalysis

Preparation of Anion Exchange Membranes by an Efficient Chloromethylation Method and Homogeneous Quaternization/Crosslinking Strategy

Preparation and Characterization of Porous Chitosan Microspheres and Adsorption Performance for Hexavalent Chromium.

Study on Synthesis of Cationic Etherifying Agent CHPTMAC

Pore Structure Control of Macroporous Methylsilsesquioxane Monoliths Prepared by in Situ Two-Step Processing

Manipulation of Mn/Ce Ratio for Deep Chlorobenzene Oxidation: Catalytic Mechanisms and Byproducts Analysis

Microfluidic Synthesis of High-Performance Monodispersed Chitosan Microparticles for Methyl Orange Adsorption

Methoxylation of Dihydromyrcene in an Intensified Fixed Bed Reactor

Mechanochemical Synthesis of Cross-Linked Chitosan and Its Application as Adsorbent for Removal of Per- and Polyfluoroalkyl Substances from Simulated Electroplating Wastewater

A Methanesulfonic Acid/Sulfuric Acid-Based Route For Easily-Controllable Chloromethylation Of Poly(Ether Ether Ketone)

Designed modification on macroporous resin for extracting sesamin from sesame oil

Effect of synthesis parameters on the chromium content and catalytic activities of mesoporous Cr-MSU-x prepared under acidic conditions

Ultrasound and microwave-assisted recycling of spent mercuric chloride catalyst