Abstract:Chitosan is a promising adsorbent for removing a wide range of pollutants from wastewater. However, its practical application is hindered by instability in acidic environments, which significantly impairs its adsorption capacity and limits its utilization in water purification. While cross-linking can enhance the acid stability of chitosan, current solvent-based methods are often costly and environmentally unfriendly. In this study, a solvent-free mechanochemical process was developed using high-energy ball milling to cross-link chitosan with various polyanionic linkers, including dextran sulfate (DS), poly[4-styrenesulfonic acid-co-maleic acid] (PSSM), and tripolyphosphate (TPP). The mechanochemically cross-linked (MCCL) chitosan products exhibited superior adsorption capacity and stability in acidic solutions compared to pristine chitosan. Chitosan cross-linked with DS (Cht-DS) showed the highest Reactive Red 2 (RR2) adsorption capacity, reaching 1559 mg·g−1 at pH 3, followed by Cht-PSSM (1352 mg·g−1) and Cht-TPP (1074 mg·g−1). The stability of MCCL chitosan was visually confirmed by the negligible mass loss of Cht-DS and Cht-PSSM tablets in pH 3 solution, unlike the complete dissolution of the pristine chitosan tablet. The MCCL significantly increased the microhardness of chitosan, with the order Cht-DS > Cht-PSSM > Cht-TPP, consistent with the RR2 adsorption capacity. When tested on simulated rinsing wastewater from chromium electroplating, Cht-DS effectively removed Cr(VI) (98.75% removal) and three per- and polyfluoroalkyl substances (87.40–95.87% removal), following pseudo-second-order adsorption kinetics. This study demonstrates the potential of the cost-effective and scalable MCCL approach to produce chitosan-based adsorbents with enhanced stability, mechanical strength, and adsorption performance for treating highly acidic industrial wastewater containing a mixture of toxic pollutants.

Study on Synthesis of Cationic Etherifying Agent CHPTMAC

IMPROVEMENT ON THIONYL CHLORIDE METHOD TO ACTIVATE HYDROXYL GROUP OF POLYMER FOR AFFINITY PARTITION

Studies on Synthesis of Cyclohexanone Diethyl Acetal

Study on Kinetics of Methyl Esterification of Alkali Weight-Reduction Wastewater Residue

Study on the Synthesis of N-Ethylethylenediamine

Investigation on the Acylation of Heterocyclic Alcoholate Anions with O,O-Dialkyl Phosphorochloridothioate in Water Solvent

Pore-Environment Engineering of Pillared Metal–Organic Frameworks for Boosting the Removal of Acetylene from Ethylene

Synthesis of Polyester Resin from Phthalic Anhydride and Epichlorohydrin

Synthesis Of Sulfur-Containing Polyacetylenes And Fabrication Of Their Hybrids With Zno Nanoparticles

Tetramethylammonium Neodecanoate As a Recyclable Catalyst for Acidolysis Reaction of Epichlorohydrin with Neodecanoic Acid

Study on the new synthesis method of n-caprylic acid esterification

Mechanochemical Synthesis of Cross-Linked Chitosan and Its Application as Adsorbent for Removal of Per- and Polyfluoroalkyl Substances from Simulated Electroplating Wastewater

Design of Epichlorohydrin-Oriented Quaternary System Separation via Hybrid Extraction–Distillation Process

Evaluation of an Improved Epichlorohydrin Synthesis from Dichloropropanol Using a Microchemical System

Evaluation and control of energy‐efficient processes for separating epichlorohydrin‐oriented quaternary system

Selective synthesis of epichlorohydrin via liquid-phase allyl chloride epoxidation over a modified Ti-MWW zeolite in a continuous slurry bed reactor

Research on the Synthesis of Environment Friendly Plasticizer Trimellitic Acid Tris (C8~C10) Ester

Preparation of 2,3-Epoxypropyl Neodecanoate: Process Optimization and Mechanism Discussion

Synthesis and Application of Hydrophobically Associating Cationic Polyacrylamide

Study on the Synthesis Process of Ring Oxidation of Cyclohexane to Two Adjacent Two Octyl Formate

Tuning the cross-linked structure of basic poly(ionic liquid) to develop an efficient catalyst for the conversion of EC to DMC