Abstract:Eulerian-Eulerian (two-fluid) simulation of gas-particle flows and coal combustion are widely used because of its convenience in simulating large-size facilities. The key point is that it needs more complex closure models, compared to those in Eulerian gas-Lagrangian DEM modeling of particles. This keynote lecture will give a brief review on our many-year studies to solve these problems. The first one is the particle turbulence model. To overcome the shortcomings of the Hinze-Tchen's "particle-tracking-fluid" model, about 20 years ago, a transport equation of particle turbulent kinetic energy and transport equations of both gas and particle Reynolds stresses were proposed by us and subsequently constitute the so-called "k-ɛ-kp", "unified second-order moment (USM)" and "non-linear k-ɛ-kp" two-phase turbulence models. Furthermore, for simulating reacting gas-particle flows and coal combustion, a full two-fluid model and a combined two-fluid-trajectory model, accounting for both particle turbulent diffusion and particle history effect due to moisture evaporation, devolatilization and char oxidation were proposed. The next is the particle-rough wall interaction. A particle-wall collision model accounting for wall roughness was proposed. Then, to overcome the limitation of the well-known kinetic theory of dense gas-particle flows, an anisotropic two-phase turbulence model, called "USM-Θ" model, accounting for both particle turbulence (large-scale fluctuation) and inter-particle collision (small-scale fluctuation) was proposed. Next, the particle-wake effect on gas turbulence modulation was studied to construct a sub-model and was added to the two-fluid modeling. At last, in recently developed two-fluid large-eddy simulation of gas-particle flows and combustion the particle sub-grid-scale (SGS) stress model is insufficiently studied. Some of them are based on a simple extension of the gas Smagorinsky SGS model without theoretical justification. Therefore, a USM-SGS two-phase stress model was proposed by us, properly accounting for the anisotropy of two-phase SGS stresses and the interaction between them.

Numerical Simulation of Turbulence-Chemical Interaction Models on Combustible Particle MILD Combustion

Assessment of turbulence-chemistry interaction models in MILD combustion regime

Numerical Investigation of Swirl-Stabilized Pulverized Coal Flames in Air and Oxy-Fuel Atmospheres by Means of Large Eddy Simulation Coupled with Tabulated Chemistry

Modeling of Pulverized Coal Combustion in Turbulent Flow with the Consideration of Intermediate Reactions of Volatile Matter

Numerical simulation of pulverized coal combustion and NO formation

Optimization of Numerical Models of MILD Combustion for Pulverized Coal

Numerical Simulation of Gas-Particle Phase Free Jet Flow Combustion

Multi-dimensional and Transient Effects on Flamelet Modeling for Turbulent Pulverized Coal Combustion

Simulation of pulverized coal combustion using a pure two-fluid model

Advanced Modeling Approaches for CFD Simulations of Coal Combustion and Gasification

A Multi-Fluid Model for Simulating Turbulent Gas–particle Flow and Pulverized Coal Combustion

Simulation of Turbulent Multiphase Flow and Pulverized Coal Combustion in Swirl Combustor

Numerical simulation of turbulent combustion: Scientific challenges

Improvement of Ignition Prediction for Turbulent Pulverized Coal Combustion with EDC Extinction Model

Numerical Simulation on the Rich/Lean Pulverized Coal Burner

Simulation of Combustion Process for Two Carbon Particles

Numerical Simulation Method and Experimental Validation of a Single Char Particle Combustion Model in Bulk Space

Numerical Investigation of the Effects of Volatile Matter Composition and Chemical Reaction Mechanism on Pulverized Coal Combustion Characteristics

Tabulated Chemistry Approach for the Simulation of MILD Combustion: Effects of Scalar Mixing and Chemistry Tabulation

Two-phase Turbulence Models in Eulerian-Eulerian Simulation of Gas-particle Flows and Coal Combustion

Numerical Investigation of Effects of Diffusion-kinetics Parameters to the Comprehensive Combustion Simulation