The Full Immersion Test Research of Refractory Weathering Steel

Man Ying Chen,Yong Jun Zhang,Jing Tao Han,De Ming Yao
DOI: https://doi.org/10.4028/www.scientific.net/amr.941-944.965
2014-01-01
Advanced Materials Research
Abstract:The paper mainly studied the corrosion properties of refractory weathering steel under chloride ion erosion environment. The full immersion tests on refractory weathering steel and carbon steel Q235 were conducted; and then a comparative analysis from the perspective of the corrosion weightlessness, the macro and micro morphology of rust layers have been made. Results indicated that refractory weathering steel and carbon steel corrosion weightlessness is relatively close to the early stage of corrosion, but the trend is reversed in the mid to late; refractory weathering steel corrosion weightlessness gradually decline, but the carbon steel’s is first increase then decrease. The carbon steel is mainly pitting corrosion, while refractory weathering steel develops general corrosion under chloride ion erosion environment. Rust layers of carbon steel are loose, hollow, and uneven. As the corrosion time goes on, the thickness of refractory weathering steel’s rust layers continuously thickening and the rust layers’ integrity are gradually increasing. The corrosion depth of refractory weathering steel is less than carbon steel’s; so does the longitudinal corrosion. This is because the microstructure of carbon steel is coarse pearlite and ferrite while the refractory weathering steel is granular bainite; the grain boundaries of carbon steel have more inclusions, especially MnS that is easily dissolved in chloride ion erosion environment. It is found that alloying elements Cr, Cu are enriched in the rust layers of refractory weathering steel by means of energy dispersive X-ray spectroscopy (EDS). The enrichment of these alloy elements in the rust layers improves the rust layer density, so that the uniform, dense, smooth rust layers formed on the surface of refractory weathering steel play a significant protective film to improve the substrate resistance corrosion.
What problem does this paper attempt to address?