Abstract:Under ideal operation conditions, the calculation for total evaporation and the minimum total evaporation of binary stripping batch distillation under optimal operations is a constrained function optimization problem. In this work, the constrained function optimization problem is transformed to an unconstrained function optimization problem based on the penalty function method and the fixed double step length factor gradient method is used to solve the unconstrained optimization problem. The calculations show that the fixed double step length factor gradient method has good convergence, and the effect of numerical truncation error accumulation on the calculation results is reduced when the number of segments is large. The energy consumption of binary stripping batch distillation under optimal operation is lower than that under constant residual fraction composition operation. It may be attributed to the following reasons: when the theoretical plate number is relatively small (close to the minimum theoretical plate number required for binary stripping batch distillation under constant residual fraction composition operation), the energy efficiency is improved because of controllable reboil ratio under the optimal operation; when the theoretical plate number is relatively large, the entropy generation in liquid mixing in the top tank is reduced because the material is removed out of the distillation system as soon as possible in the premise of relatively high energy efficiency under the optimal operation because of the controllable reboil ratio. Under ideal operating conditions and infinite number of theoretical plates, the change strategy of the reboil ratio and the calculation formula of the minimum total evaporation of binary stripping batch distillation under optimal operation are obtained by summarizing and extrapolating the above calculation results.

Energy Consumption in Binary Batch Distillation of Total Reflux and Top Accumulation

ENERGY CONSUMPTION OF BATCH DISTILLATION OF BINARY MIXTURE UNDER"TOTAL REFLUX"

Thermodynamic Analysis, Simulation and Optimization on Energy Savings of Ideal Internal Thermally Coupled Distillation Columns

Optimization operation of binary stripping batch distillation and its minimum total evaporation

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Optimization of Internal Thermally Coupled Distillation Columns of Nonideal Mixture

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Nonequilibrium model and parameter estimation on three-phase distillation in a packed column

Energy Consumption Analysis and Minimum Reboil Ratio in Batch Stripping Distillation at Constant Reboil Ratio

ALGORITHM OF MINIMUM REFLUX RATIO OF BATCH DISTILLATION UNDER CONSTANT REFLUX RATIO AND ITS ENERGY CONSUMPTION ANALYSIS

Minimum Theoretical Trays for Binary Batch Distillation Under Total Reflux and Top Accumulation

MODELING OF BATCH DISTILLATION STARTING FROM COLD STATE

Sequential Two-Column Batch Distillation Processes for Separation of Ternary Mixture Containing Three Binary Minimum Boiling Point Homoazeotropes

Minimum total vapor capacity of binary regular batch distillation

Towards a comprehensive approach to optimal control of non-ideal binary batch distillation

Assessment of the Effect of Feed Plate Location on Interactions for a Binary Distillation Column

A Nonequilibrium Model for Distillation Processes

Analysis of Heat Integration, Intermediate Reboiler and Vapor Recompression for the Extractive Distillation of Ternary Mixture with Two Binary Azeotropes

Design and comprehensive analysis of a novel pressure-swing batch distillation process for the separation of a binary azeotrope with various boiling behaviors

Use of multiple inter-reboilers to achieve energy savings and improve thermodynamic efficiency of the distillation of N,N-dimethylformamide wastewater

Energy-Saving Reduced-Pressure Extractive Distillation with Heat Integration for Separating the Biazeotropic Ternary Mixture Tetrahydrofuran–Methanol–Water