Abstract:To improve the stability of waterborne epoxy–acrylic emulsions and their comprehensive properties, such as the chemical resistance of coatings, a new research idea is proposed in this paper. First, a series of high-molecular-weight epoxy resins were synthesized with epoxy resin E-51 and bisphenol A (BPA) using benzyl triphenyl phosphine bromide as the catalyst. Then, free-radical graft copolymerization was carried out between the epoxy resin and methacrylic acid (MAA), styrene (ST), and butyl acrylate (BA) using benzoyl peroxide (BPO) as the initiator. This method ensured that the epoxy groups were retained. Finally, the carboxylic acid groups were neutralized with N,N-dimethylethanolamine (DMEA), and a stable aqueous epoxy–acrylic emulsion was obtained by high-speed dispersion in deionized water. The effects of key factors such as temperature, time, the molecular weight and dosage of epoxy resin, the dosage of MAA, the dosage of BPO, and the neutralization degree of the synthesis of emulsions and coating film properties were mainly discussed. The molecular weight and molecular weight distribution of the epoxy resin were determined by gel permeation chromatography (GPC). The epoxy resin and its graft copolymer were analyzed and characterized by Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The particle size and distribution of the emulsions were tested by laser particle size analysis. The morphology of the emulsion particles was observed by transmission electron microscopy. The results showed that the acrylic monomers (MAA, ST, and BA) were grafted onto the epoxy resin. The graft copolymers showed higher glass transition temperatures compared with those of the pure epoxy resin. TGA showed that the graft copolymer started to decompose at a high temperature before the pure epoxy resin did, and the thermal stability was slightly reduced. The prepared emulsions with a particle size of 160 nm had a storage stability of more than one year and showed excellent dilution stability, mechanical stability, and freeze–thaw stability. The emulsions were coated and cured at 150 °C for 1 h with a pencil hardness of 5 H, an adhesion of grade 1, and a flexibility of 1 mm. The water resistance was >60 days, the salt water resistance was >30 days, the acid resistance was >10 days, and the alkali resistance was >5 days.

Preparation of Waterborne Phosphated Acrylate–epoxy Hybrid Dispersions and Their Application As Coil Coating Primer

Waterborne E10p Modified Acrylic Resin and Its Application in Coil Coating

Preparation and Properties of Waterborne Acrylic-Modified Epoxy Phosphate Resin and Its Coating

Preparation and Performance of a Self-Produced High-Molecular-Weight Waterborne Epoxy–Acrylic Emulsion

Preparation of a nonionic waterborne epoxy resin emulsion and study on its anticorrosion property

Preparation of Environmentally Friendly Anticorrosive Coatings with Aniline Trimer-Modified Waterborne Polyurethane

Effect of Dimethylaminoethyl Methacrylate on Properties of UV Curable and Cathodic Electrophoretic Paint

Graft Copolymerization of Epoxy Resin and Acrylate Monomers and the Properties of Automobile Cathodic Electrophoresis Coating Prepared Therewith

UV-curable waterborne epoxy acrylate coating modified by monomethacryloyloxy-terminated fluorinated oligomer

Incorporation of Reactive Corrosion Inhibitor in Waterborne Acrylic Polyurethane Coatings and Evaluation of Its Corrosion Performance

Preparation and Its Performance of Waterborne Automobile Metallic Primer

High Performances Polyurethane-Urea Polyacrylate Hybrid Emulsion Coatings with Multiple Crosslinking Structures

Synthesis of Hybrid Epoxy Methacrylate Resin Based on Diglycidyl Ethers and Coatings Preparation via Cationic and Free-Radical Photopolymerization

Synthesis of Self-Crosslinked Acrylic Resin for Cathodic Electrodeposited Coatings

Study on Epoxy-Amine/epoxy-acrylate Complex Cathodic Electrodeposition Coating

Preparation of waterborne asphalt anticorrosive coatings

Photocurable Epoxy Acrylate Coatings Preparation by Dual Cationic and Radical Photocrosslinking

Fluorine‐phosphate copolymerization waterborne acrylic resin coating with enhanced anticorrosive performance

Preparation of Dendritic Hyperbranched Polyester Modified Acrylic Resin and Study on Properties of Its Waterborne Coating Films

Preparation of waterborne automotive coatings and investigation of viscosity

Synthesis of waterborne hydroxyl acrylate resins and its application in VOC-free waterborne coatings