Abstract:To improve the stability of waterborne epoxy–acrylic emulsions and their comprehensive properties, such as the chemical resistance of coatings, a new research idea is proposed in this paper. First, a series of high-molecular-weight epoxy resins were synthesized with epoxy resin E-51 and bisphenol A (BPA) using benzyl triphenyl phosphine bromide as the catalyst. Then, free-radical graft copolymerization was carried out between the epoxy resin and methacrylic acid (MAA), styrene (ST), and butyl acrylate (BA) using benzoyl peroxide (BPO) as the initiator. This method ensured that the epoxy groups were retained. Finally, the carboxylic acid groups were neutralized with N,N-dimethylethanolamine (DMEA), and a stable aqueous epoxy–acrylic emulsion was obtained by high-speed dispersion in deionized water. The effects of key factors such as temperature, time, the molecular weight and dosage of epoxy resin, the dosage of MAA, the dosage of BPO, and the neutralization degree of the synthesis of emulsions and coating film properties were mainly discussed. The molecular weight and molecular weight distribution of the epoxy resin were determined by gel permeation chromatography (GPC). The epoxy resin and its graft copolymer were analyzed and characterized by Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The particle size and distribution of the emulsions were tested by laser particle size analysis. The morphology of the emulsion particles was observed by transmission electron microscopy. The results showed that the acrylic monomers (MAA, ST, and BA) were grafted onto the epoxy resin. The graft copolymers showed higher glass transition temperatures compared with those of the pure epoxy resin. TGA showed that the graft copolymer started to decompose at a high temperature before the pure epoxy resin did, and the thermal stability was slightly reduced. The prepared emulsions with a particle size of 160 nm had a storage stability of more than one year and showed excellent dilution stability, mechanical stability, and freeze–thaw stability. The emulsions were coated and cured at 150 °C for 1 h with a pencil hardness of 5 H, an adhesion of grade 1, and a flexibility of 1 mm. The water resistance was >60 days, the salt water resistance was >30 days, the acid resistance was >10 days, and the alkali resistance was >5 days.

Graft Copolymerization of Epoxy Resin and Acrylate Monomers and the Properties of Automobile Cathodic Electrophoresis Coating Prepared Therewith

Study on Epoxy-Amine/epoxy-acrylate Complex Cathodic Electrodeposition Coating

Synthesis of Self-Crosslinked Acrylic Resin for Cathodic Electrodeposited Coatings

Effect of Dimethylaminoethyl Methacrylate on Properties of UV Curable and Cathodic Electrophoretic Paint

Preparation of Waterborne Phosphated Acrylate–epoxy Hybrid Dispersions and Their Application As Coil Coating Primer

Molecular Dynamics Simulations on Epoxy Resin Composite via Grafting Acryloyl-chloride to Inhibit Electron Transport and Improve Thermal-mechanical Properties

Preparation of waterborne automotive coatings and investigation of viscosity

Low Dielectric Loss and Infrared Emissivity Coating with Enhanced Mechanical Property by Grafting Modification of EPDM

Synthesis of Hybrid Epoxy Methacrylate Resin Based on Diglycidyl Ethers and Coatings Preparation via Cationic and Free-Radical Photopolymerization

Effect of Methanol and Butanol Etherized Amino Resin Curing Agent on Acrylic Cathodic Electrophoretic Coating

Ambient Curable Polyacrylate Coating

THE STUDY ON EMULSION GRAFT POLYMERIZATION OF EPOXY RESIN/ACRYLIC RESIN

Photocurable Epoxy Acrylate Coatings Preparation by Dual Cationic and Radical Photocrosslinking

Synthesis and Application of Cationic Fluorinated Acrylic Resin for Use in Cathodic Electrodeposition Coatings

Development of a Transparent Acrylic Anodic Electrophoretic Coating

Preparation and Performance of a Self-Produced High-Molecular-Weight Waterborne Epoxy–Acrylic Emulsion

Synthesis of Epoxy Methacrylate Resin and Coatings Preparation by Cationic and Radical Photocrosslinking

Preparation of an In-Situ Crosslinked Polymer Coating and A Double-Layered Thermal Ctp Plate

Preparation and Properties of Waterborne Acrylic-Modified Epoxy Phosphate Resin and Its Coating

Synthesis of self-emulsifying polyester for automotive primer surfacer and the performance of cured film

Preparation of a nonionic waterborne epoxy resin emulsion and study on its anticorrosion property