Abstract:The catalytic performance of Ni-Co bi-component catalysts in CO2 reforming of methane (CRM) under high pressures was studied for obtaining highly stable Ni-based catalysts, which is important for the industrialization of high pressure CRM. A series of 5% (xNiyCo)/SBA-15 catalysts were prepared with a modified co-impregnation method by adding trace amount of beta-cyclodextrin (CD) into Ni(NO3)(2) impregnation solution. The effects of catalyst compositions (Ni/Co ratio) and the CRM reaction conditions (pressure, gas hourly space velocity, time on stream, etc) on the catalysts stabilities were investigated. The carbon deposition behaviors of the catalysts during the high pressure CRM reaction were disclosed through detailed characterizations of the spent catalysts. The type of coke, instead of the amount of deposited carbon, was proved to be responsible for the deactivation of 5% (xNiyCo)/SBA-15 catalysts during the high pressure reaction. The amount of carbon deposition depended strongly on the Co loading in the bimetallic catalysts. Long-term stability with 100 h TOS at 2.0 MPa and 800 degrees C was achieved for the optimized 5% (4.5Ni0.5Co)/SBA-15 catalyst and a slow deactivation (decrease in CH4 conversion) was observed. The reaction results with different reaction time over 5% (4.5Ni0.5Co)/SBA-15 at high pressures suggested that the accumulation of carbon deposition took place mainly at the initial stage of the CRM reaction. Moreover, the disorder degree of deposited carbon species and the sintering of metal particles were identified as the primary reasons for the deactivation of the catalysts. Trace Co enriched on Ni-Co surface of 5% (4.5Ni0.5Co)/SBA-15 suppressed Ni aggregation and facilitated the adsorption of co-reactant.

Co2 Reforming of Methane to Syngas over Highly-Stable Ni/Sba-15 Catalysts Prepared by P123-Assisted Method

Dry Reforming of Methane over Ni-Supported SBA-15 Prepared with Physical Mixing Method by Complexing with Citric Acid

Carbon Dioxide Reforming of Methane over Ni Supported SiO2: Influence of the Preparation Method on the Resulting Structural Properties and Catalytic Activity

CO2 Reforming of Methane over Ni/SBA-15 Prepared with Β-Cyclodextrin – Role of Β-Cyclodextrin in Ni Dispersion and Performance

Combination of CO2 Reforming and Partial Oxidation of Methane over Ni/BaO-SiO2 Catalysts to Produce Low H2/CO Ratio Syngas Using a Fluidized Bed Reactor

CO2 Reforming of Methane over a Highly Dispersed Ni/Mg-Al-O Catalyst Prepared by a Facile and Green Method

Synthesis, Characterization and Catalytic Performance of MgO-coated Ni/SBA-15 Catalysts for Methane Dry Reforming to Syngas and Hydrogen

Template in situ inducing dispersion of nickel on SBA-15 for methane reforming with carbon dioxide

CO2 Reforming with Methane Reaction over Ni@SiO2 Catalysts Coupled by Size Effect and Metal-Support Interaction

Study on CO2 reforming of methane to syngas over Al 2O3-ZrO2 supported Ni catalysts prepared via a direct sol-gel process

Meso-porous Ni/Mg/Al catalysts for methane reforming with CO2

Methane dry reforming over activated carbon supported Ni-catalysts prepared by solid phase synthesis

Combined Catalytic Partial Oxidation and CO2 Reforming of Methane over ZrO2-modified Ni/SiO2 Catalysts Using Fluidized-Bed Reactor

Improving Anti-Coking Properties of Ni/Al2O3 Catalysts via Synergistic Effect of Metallic Nickel and Nickel Phosphides in Dry Methane Reforming

Promoting Effect of Glucose and Β-Cyclodextrin on Ni Dispersion of Ni/MCM-41 Catalysts for Carbon Dioxide Reforming of Methane to Syngas

Ni-based catalysts with coke resistance enhance by radio frequency discharge plasma for CH4/CO2 reforming

CO2 Reforming of Methane to Syngas at High Pressure over Bi-Component Ni-Co Catalyst: the Anti-Carbon Deposition and Stability of Catalyst

A Novel Promoting Effect of Chelating Ligand on the Dispersion of Ni Species over Ni/SBA-15 Catalyst for Dry Reforming of Methane

Nickel Phosphide Catalysts as Efficient Systems for CO2 Upgrading via Dry Reforming of Methane

Syngas Production from Reforming of Methane with Co2 and O-2 over Ni/Sro-Sio2 Catalysts in A Fluidized Bed Reactor

Methane Reforming with CO2 Using Nickel Catalysts Supported on Yttria-Doped SBA-15 Mesoporous Materials Via Sol–gel Process