Abstract:The present study scrutinizes premixed flame dynamics in micro-channels, thereby shedding light on advanced miniature micro-combustion technologies. While equidiffusive burning (when the Lewis number Le = 1) is a conventional approach adopted in numerous theoretical studies, real premixed flames are typically non-equidiffusive (Le ≠ 1), which leads to intriguing effects, such as diffusional-thermal instability. An equidiffusive computational study [V. Akkerman et al., Combust. Flame 145, 675–687 (2006)] reported regular oscillations of premixed flames spreading in channels having nonslip walls and open extremes. Here, this investigation is extended to non-equidiffusive combustion in order to systematically study the impact of the Lewis number on the flame in this geometry. The analysis is performed by means of computational simulations of the reacting flow equations with fully-compressible hydrodynamics and one-step Arrhenius chemical kinetics in channels with adiabatic and isothermal walls. In the adiabatic channels, which are the main case of study, it is found that the flames oscillate at low Lewis numbers, with the oscillation frequency decreasing with Le, while for the Le > 1 flames, a tendency to steady flame propagation is observed. The oscillation parameters also depend on the thermal expansion ratio and the channel width, although the impacts are rather quantitative than qualitative. The analysis is subsequently extended to the isothermal channels. It is shown that the role of heat losses to the walls is important and may potentially dominate over that of the Lewis number. At the same time, the impact of Le on burning in the isothermal channels is qualitatively weaker than that in the adiabatic channels.

The impact of channel gap distance on flame splitting limit of H 2 /air mixture in microchannels with wall cavities

Effect of channel gap on flame-splitting limit of a micro combustor with cavities

Effect of channel gap distance on the flame blow-off limit in mesoscale channels with cavities for premixed CH 4 /air flames

Numerical Investigation on Flame Propagation Characteristics of Non-Premixed Hydrogen and Air in a Curved Micro-Combustor

Effects of Channel Length on Propagation Behaviors of Non-Premixed H2-air Flames in Y-shaped Micro Combustors

Experimental Investigation and Numerical Analysis on Flame Stabilization of CH4/air Mixture in a Mesoscale Channel with Wall Cavities

Effect of High Hydrogen Enrichment on the Outer-Shear-layer Flame of Confined Lean Premixed CH4/H2/air Swirl Flames

Effect of Inlet Mixture Temperature on Combustion Efficiency Of Lean H2/air Flames in a Micro Cavity-Combustor

Experimental study on the propagation characteristics of hydrogen/methane/air premixed flames in a narrow channel

Combustion characteristics of premixed CH4/air flame in mesoscale channel with cavities

Effect of external surface emissivity on flame-splitting limit in a micro cavity-combustor

A Numerical Study on Diffusion H2/air Flames in Y-shaped Mesoscale Combustors

Experimental and Numerical Investigations on Flame Stability of Methane/air Mixtures in Mesoscale Combustors Filled with Fibrous Porous Media

Numerical Investigation on Mixing Performance and Diffusion Combustion Characteristics of H-2 and Air in Planar Micro-Combustor

Analytical and Experimental Study of Premixed Methane–air Flame Propagation in Narrow Channels

A Numerical Investigation on Combustion Characteristics of H-2/Air Mixture in A Microcombustor with Wall Cavities

Experimental and Numerical Investigations of Hydrogen–air Premixed Combustion in a Converging–diverging Micro Tube

Effect of the Cavity Depth on the Combustion Efficiency of Lean H2/air Flames in a Micro Combustor with Dual Cavities

Combustion characteristics of hydrogen/air mixture in a micro-combustor with cavities

Impacts of Fuel Nonequidiffusivity on Premixed Flame Propagation in Channels with Open Ends

Effect of Inlet Temperature on Combustion Efficiency of Lean H2/air Mixtures in a Micro-Combustor with Wall Cavities