Abstract:There are on-going efforts to utilize guided waves for structural damage detection. Active sensing devices such as lead zirconate titanate (PZT) have been widely used for guided wave generation and sensing. In addition, there has been increasing interest in adopting wireless sensing to structural health monitoring (SHM) applications. One of major challenges in wireless SHM is to secure power necessary to operate the wireless sensors. However, because active sensing devices demand relatively high electric power compared to conventional passive sensors such as accelerometers and strain gauges, existing battery technologies may not be suitable for long-term operation of the active sensing devices. To tackle this problem, a new wireless power and data transmission paradigm has been developed in this study. The ultimate goal of the research is to develop an optical system for guided wave generation and sensing. This paper mainly focuses on the excitation aspect of the overall system. The proposed technique wirelessly transmits power necessary for PZT-based guided wave generation using laser and optoelectronic devices. First, a desired waveform is generated and the intensity of the laser source is modulated accordingly using an electro-optic modulator (EOM). Next, the modulated laser is wirelessly transmitted to a photodiode connected to a PZT. Then, the photodiode converts the transmitted light into an electric signal and excites the PZT to generate guided waves on the structure where the PZT is attached to. Finally, the corresponding response from the sensing PZT is measured. The feasibility of the proposed method for wireless guided wave generation has been experimentally demonstrated.

A wireless guided wave excitation technique based on laser and optoelectronics

Development of A Wireless Power and Data Transmission System Using Laser and Optoelectronic Devices for Guided Wave-Based Structural Health Monitoring

Development Of A Non-Contact Pzt Excitation And Sensing Technology Via Laser

Development Of A Wireless Power Transmission System For Guided Wave Generation And Sensing Via A Laser

Development of an Optic-Based Guided Wave Excitation Technique

Wireless guided wave and impedance measurement using laser and piezoelectric transducers

Ultrasonic Guided Wave Approach Incorporating SAFE for Detecting Wire Breakage in Bridge Cable

Piezoelectric Sensing Techniques in Structural Health Monitoring: A State-of-the-Art Review

Remote Guided Wave Imaging using Wireless PZT Excitation and Laser Vibrometer Sensing for Local Bridge Monitoring

Guided-Wave Based Damage Detection Method For Various Materials Using Piezoelectric Sensors/Actuators

Structural Health Monitoring System Based on a Concept of Lamb Wave Focusing by the Piezoelectric Array

Guided Wave Generation, Sensing and Damage Detection Using In-Plane Shear Piezoelectric Wafers

An ultrasensitive device with embedded phononic crystals for the detection and localisation of nonlinear guided waves

Wireless Structural Health Monitoring and Early-Stage Damage Detection Using Piezoelectric Impedance Sensors

Development of a Novel Guided Wave Generation System Using a Giant Magnetostrictive Actuator for Nondestructive Evaluation

Modeling and Experimental Detection of Damage in Various Materials Using the Pulse-Echo Method and Piezoelectric Sensors/actuators

Experimental and Numerical Validation of Guided Wave Phased Arrays Integrated Within Standard Data Acquisition Systems for Structural Health Monitoring

Wireless Structural Health Monitoring for Critical Members of Civil Infrastructures Using Piezoelectric Active Sensors

Modeling Of Guided Waves For Detection Of Linear And Nonlinear Structural Damage

Guided Wave Generation and Propagation in Piezoelectric Composite Plates for Establishing Structural Self-awareness

New approach to the excitation of plate waves for piezoelectric thick-film devices