Abstract:This study developed an innovative process for the treatment of low-ammonium wastewater in a single-stage bioreactor over 250 days. Partial nitritation-anammox and partial denitritation-anammox (PN/A-PDN/A) processes were combined under aerobic/anoxic operation, and a high nitrogen removal efficiency (94.6%) was obtained at a nitrogen removal rate of 0.54 kg N m<sup>–3</sup> d<sup>–1</sup> and a chemical oxygen demand to total inorganic nitrogen (COD/TIN) ratio of 0.28. Mass balance analysis identified anammox as the dominant nitrogen removal pathway, achieving 88.3% nitrogen loss. The abundance of anammox bacteria and their bioactivity rapidly increased and were effectively maintained, as indicated by qPCR and bioactivity tests. The PN/A-PDN/A process provided two pathways of nitrite production for anammox, which favored the enrichment of anammox bacteria and stable processing. In addition, the enrichment of anammox bacteria was promoted by selective floc discharge since anammox bacteria are mainly located in granules (relative abundance of 29.64 ± 7.89%). Competitive organisms (including heterotrophic bacteria and nitrite oxidizing bacteria), enriched in flocs, were washed out. Overall, these findings confirmed anammox, sequentially combined with PN and PDN via aerobic/anoxic strategy, as a promising alternative for mainstream anammox.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c01314?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c01314</a>.Details about tests; calculation of inorganic nitrogen and organics removal performance; 16S rRNA-targeted oligonucleotide probes and annealing temperatures; Wilcoxon rank-sum test results for the core bacterial microbiome on the phyla level in both granule and floc samples at days 120 and 180; Wilcoxon rank-sum test results for the core bacterial microbiome of granules and flocs at days 120 and 180; comparison of the single-stage PN/A and PDN/A during treatment of low-ammonium wastewater; comparison of conventional nitrification/denitrification and anammox-based processes; variations of process operation parameters, TIN, organics, and the initial influent ammonium transformation; variations of the bioactivities of AOB, NOB, and AnAOB; conversion of nitrogen compounds during the aerobic and anoxic phases; inorganic nitrogen compounds and organics during one cycle of operation on day 110; variations of nitrogen compounds during two batch tests; pathways of nitrogen removal during the PN/A-PDN/A process; particle size distribution (>200 μm) and microscopic images with different morphologies on days 5 and 150; abundances of AOB, NOB, and AnAOB on granules and flocs; and relative sequence abundance of bacterial phyla and dominant OTU members of the bacterial microbiome displayed by iTOL (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c01314/suppl_file/es0c01314_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Modeling of Nitritation and Denitritation in a Novel PITSF-SEU Process Using an Extension of ASM2d Model

Modeling And Particular Application Of Asm2d Model For Describing Organic Matter And Nutrient Removal In A Novel Anaerobic-Anoxic/Oxiceight-Phased System

Model-Based Evaluation of N 2 O Production Pathways in the Anammox-Enriched Granular Sludge Cultivated in a Sequencing Batch Reactor.

Modeling the partial nitrification in sequencing batch reactor for biomass adapted to high ammonia concentrations

Biological Nutrient Removal with Limited Organic Matter Using A Novel Anaerobic-Anoxic/Oxic Multi-Phased Activated Sludge Process

Enhanced Biological Nutrient Removal in Sequencing Batch Reactors Operated As Static/oxic/anoxic (SOA) Process

Simulation Of Nitrogen And Phosphorus Removal In Amon Integrative Reactor By Activated Sludge Model 2d

Simulation and performance evaluation of the anoxic/anaerobic/aerobic process for biological nutrient removal

Establishment and optimization of partial nitrification/anammox/partial nitrification/anammox (PN/A/PN/A) process based on multi-stage ammonia oxidation: Using response surface method as a tool

A Novel Simultaneous Partial Nitritation, Denitratation and Anammox (SPNDA) Process in Sequencing Batch Reactor for Advanced Nitrogen Removal from Ammonium and Nitrate Wastewater

Model-Based Evaluation of Denitrifying P Removal in a Two-Sludge System

Predictions of the Influent and Operational Conditions for Partial Nitritation with a Model Incorporating Ph Dynamics.

Modelling the Simultaneous Effects of Organic Carbon and Ammonium on Two-Step Nitrification Within a Downward Flow Biofilm Reactor

Experimental investigation and modeling of innovative five-tank anaerobic-anoxic/oxic process

Optimization of the Aeration Strategies in a Deammonification Sequencing Batch Reactor for Efficient Nitrogen Removal and Mitigation of N2O Production

Mathematical simulation and experimental verification of a novel control strategy for a single stage PN/A (partial nitrification/Anammox) SBR (sequencing batch reactor)

An approach for modeling two-step denitrification in activated sludge systems

Steady-state model-based evaluation of sulfate reduction, autotrophic denitrification and nitrification integrated (SANI) process

Simultaneous in-situ sludge reduction and nutrient removal in an A(2)MO-M system: Performances, mechanisms, and modeling with an extended ASM2d model.

Improving Efficiency and Stability of Anammox through Sequentially Coupling Nitritation and Denitritation in a Single-Stage Bioreactor

Simultaneous Effect of Organic Carbon and Ammonium on Two-Step Nitrification Within Sequential Batch Reactor (SBR)