Abstract:A sulfur cycle-based wastewater treatment process, namely the Sulfate reduction, Autotrophic denitrification and Nitrification Integrated process (SANI (R) process) has been recently developed for organics and nitrogen removal with 90% sludge minimization and 35% energy reduction in the biological treatment of saline sewage from seawater toilet flushing practice in Hong Kong. In this study, sulfate- and sulfite-rich wastes from simple wet flue gas desulfurization (WPGD) were considered as a potential low-cost sulfur source to achieve beneficial co-treatment with non-saline (freshwater) sewage in continental areas, through a Mixed Denitrification (MD)-SANI process trialed with synthetic mixture of simple WFGD wastes and freshwater sewage. The system showed 80% COD removal efficiency (specific COD removal rate of 0.26 kg COD/kg VSS/d) at an optimal pH of 7.5 and complete denitrification through MD (specific nitrogen removal rate of 0.33 kg N/kg VSS/d). Among the electron donors in MD, organics and thiosulfate could induce a much higher denitrifying activity than sulfide in terms of both NO3- reduction and NO2- reduction, suggesting a much higher nitrogen removal rate in organics-, thiosulfate- and sulfide-based MD in MD SANI compared to sulfide alone-based autotrophic denitrification in conventional SANI. Diverse sulfate/sulfite-reducing bacteria (SRB) genera dominated in the bacterial community of sulfate/sulfite-reducing up-flow sludge bed (SRUSB) sludge without methane producing bacteria detected. Desulfomicrobium-like species possibly for sulfite reduction and Desulfobulbus-like species possibly for sulfate reduction are the two dominant groups with respective abundance of 24.03 and 14.91% in the SRB genera. Diverse denitrifying genera were identified in the bacterial community of anoxic up-flow sludge bed (AnUSB) sludge and the Thauera- and Thiobacillus-like species were the major taxa. These results well explained the successful operation of the lab-scale MD SANI process. (C) 2015 Elsevier Ltd. All rights reserved.

Steady-state model-based evaluation of sulfate reduction, autotrophic denitrification and nitrification integrated (SANI) process

SANI ® process realizes sustainable saline sewage treatment: Steady state model-based evaluation of the pilot-scale trial of the process

The Demonstration of a Novel Sulfur Cycle‐based Wastewater Treatment Process: Sulfate Reduction, Autotrophic Denitrification, and Nitrification Integrated (SANI®) Biological Nitrogen Removal Process

System Evaluation and Microbial Analysis of a Sulfur Cycle-Based Wastewater Treatment Process for Co-treatment of Simple Wet Flue Gas Desulfurization Wastes with Freshwater Sewage.

Modeling of Sulfur-Driven Autotrophic Denitrification Coupled with Anammox Process

Sulphate reduction, mixed sulphide- and thiosulphate-driven Autotrophic denitrification, NItrification, and Anammox (SANIA) integrated process for sustainable wastewater treatment

Electrochemically assisted sulfate reduction autotrophic denitrification nitrification integrated (e-SANI®) process for high-strength ammonium industrial wastewater treatment

Influence of COD/sulfate ratios on the integrated reactor system for simultaneous removal of carbon, sulfur and nitrogen.

[Modeling and Dynamic Simulation of the Multimode Anaerobic/anoxic/aerobic Wastewater Treatment Process].

A novel approach to realize SANI process in freshwater sewage treatment – Use of wet flue gas desulfurization waste streams as sulfur source

Simulation and performance evaluation of the anoxic/anaerobic/aerobic process for biological nutrient removal

Characterization of sulfate-reducing granular sludge in the SANI® process

Mathematical Modeling of Simultaneous Carbon-Nitrogen-sulfur Removal from Industrial Wastewater.

Novel Sulfate Reduction Coupled to Simultaneous Nitrification and Autotrophic Denitrification Process for Removing Nitrogen and Organics from Saline Wastewater

Physicochemical and Biological Characterization of Long-Term Operated Sulfate Reducing Granular Sludge in the SANI® Process.

Development and Experimental Evaluation of a Steady-state Model for the Step-feed Biological Nitrogen Removal Process

Industrial flue gas desulfurization waste may offer an opportunity to facilitate SANI® application for significant sludge minimization in freshwater wastewater treatment.

Study of Simultaneous Partial Nitrification, Anammox and Denitrification (snad) Process in an Intermittent Aeration Membrane Bioreactor

Development of a mechanistic model for biological nutrient removal activated sludge systems and application to a full-scale WWTP

Mathematical Modeling of Autotrophic Denitrification (AD) Process with Sulphide As Electron Donor.

Simultaneous Removal of Sulfide, Nitrate and Acetate under Denitrifying Sulfide Removal Condition: Modeling and Experimental Validation