Abstract:Adsorption techniques are widely used to remove some classes of pollutants from waters, especially those which are not easily biodegradable. The removal of Methylene blue (MB), as a pollutant, from waste waters of textile, paper, printing and other industries has been addressed by the researchers. The aim of this study is to eliminate MB by Activated Coconut Shells (ACS) produced at low cost by adsorption in batch mode. The ACS was characterized by the FTIR spectroscopy and point of zero charge (pHpzc: 5.06). Some examined factors were found to have significant impacts on the MB uptake of ACS like the initial dye concentration Co (40-120 mg/L), solution pH (2-8), ACS dose (1-12 g/L), agitation speed (50-500 r/min), particles size (1.0-1.2 mm) and temperature (298-333 K). The best capacity was found at pH 6 with an adsorbent dose 8 g/L, an agitation speed 200 r/min and a contact time of 60 min. Modeling Kinetics and Isotherms shows that the pseudo-second-order kinetic model with R 2 (0.935 -0.998) and Langmuir adsorption isotherm model provide better fitness to the experimental data with the maximum adsorption capacity of 30.30 mg/g at 25°C. The separation factor RL (0.933-0.541) in the concentration range studied (10-120 mg/L) shows a favorable adsorption. The isotherms at different temperatures have been used for the determination of the free energy ΔG° (198-9.72 kJ/mol); enthalpy ΔH° (82.082 kJ/mol) and entropy ΔSo (245.689 J/K mol) to predict the nature of MB adsorption process. The positive values of (ΔGo) and (ΔHo) indicate a non-spontaneous and endothermic MB adsorption with a chemisorption. The adsorbent elaborated from Coconut Shells was found to efficient and suitable for the removal of MB dye from aqueous solutions, due to its availability, low cost preparation and good uptake capacity.

Adsorption of Methylene Blue by A Low-Cost Biosorbent: Citric Acid Modified Peanut Shell

Adsorption characteristics of methylene blue on peanut shell activated carbon

FeOCl-Modified Peanut Hull As Novel Bio-Sorbent for Fast Adsorption of Methylene Blue: Kinetics, Isotherms, and Mechanisms

Ultrafast removal of methylene blue from water by Fenton-like pretreated peanut hull as biosorbent

Adsorption Behavior of Methylene Blue Onto Activated Coconut Shells: Kinetic, Thermodynamic, Mechanism and Regeneration of the Adsorbent

Biosorption of Methylene Blue by Chemically Modified Cellulose Waste

Removal of Methylene Blue from Aqueous Solution by Chaff in Batch Mode

Adsorption of methylene blue from water by citric acid modified orange peel.

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Adsorption of Methylene Blue in Water Solution by straw Stalks

Enhanced adsorption performance of activated carbon prepared from peanut shell for the adsorption of dyes from aqueous solution

A novel activated carbon material from peanut shells for the removal of methyl orange and methylene blue dyes from wastewater: kinetics, isotherms and mechanism

Study on the Biosorption Mechanism of Methylene Blue in Aqueous Solution Using Pummelo Peel

Adsorption of methylene blue from aqueous solutions by modified expanded graphite powder

Pomelo Peel Modified With Citrate As A Sustainable Adsorbent For Removal Of Methylene Blue From Aqueous Solution

Removal of Methylene Blue from Aqueous Solution Using Chitosan-G-poly(acrylic Acid)/montmorillonite Superadsorbent Nanocomposite

Removal of Methylene Blue by Chemically Modified Defatted Brown Algae Laminaria Japonica

The Adsorption Of Methylene Blue By An Amphiphilic Block Co-Poly(Arylene Ether Nitrile) Microsphere-Based Adsorbent: Kinetic, Isotherm, Thermodynamic And Mechanistic Studies

Removal of methylene blue from aqueous solution by a novel nonporous carbonaceou sorbent derived from sucrose

Adsorption of methylene blue from an aqueous solution using a cucurbituril polymer