Abstract:SiC fibers can be used to reinforce a range of titanium base materials including alloys of the (alpha+beta) type, metastable beta type and near a type, as well intermetallic based gamma-TiAl and orthorhombic Ti2AlNb. Along the fiber directions the obtained composites possess exceptional strength and stiffness, creating a large room and great flexibility for the design of higher performance components to be used in both aero engine and aircraft. The composites can be used by itself such as in sheet and bar form, or as a reinforcing module embedded in titanium alloy components, e.g., as a ring at the rim of a compressor disk. In this paper, recent progress in the development and application of SiC fiber reinforced titanium matrix composites was reviewed, emphasizing the work conducted at the Institute of Metal Research, Chinese Academy of Sciences. Five aspects of research were covered, the first is fiber manufacture and batch production, in which the influence of the chemical vapor deposition parameters on the quality of the W-core SiC fiber was discussed, and the relationship between the tungsten-SiC interface reaction and the high temperature stability of the fiber was described. The second part covers the composite interface, in which a detailed discussion was given to both the chemical and physical compatibility, followed by the design of different reaction layers between the SiC fiber and different titanium based matrixs. The mechanical property section presents tensile data of a range of composites developed in the authors' group and compares to literature reports where available, together with a comprehensive discussion of failure due to fatigue and creep. The fourth part deals with non-destructive testing, presenting new results of inspection on real size composite components using a combination of several techniques including X-ray, industrial CT and ultrasonic scanning. The limitations of each method were shown and the technical challenges were identified. The last part describes the development of structural parts and their verification testing. Titanium matrix composite sheets with [0/90] laminate prepared by both the foil-fiber-foil and matrix coated fiber methods were highlighted, followed by a description of the development of full size bladed ring and excess revolution testing. Future directions of research on SiC fiber reinforced titanium matrix composites were also discussed.

Finite Element Modeling of Consolidation Process of Si C Fiber-Reinforced Titanium Matrix Composites Via Matrix-Coated Fiber Method

Manufacturing Titanium Metal Matrix Composites by Consolidating Matrix Coated Fibres

Dynamic Densification of Metal Matrix-Coated Fibre Composites: Modelling and Processing

Fibre re-arrangement and matrix softening phenomena in matrix-coated fibre (MCF) composites during vacuum hot pressing consolidation

Microstructure and Interfacial Strength of SiC Fiber-Reinforced Ti17 Alloy Composites with Different Consolidation Temperatures

Thermal residual stress in continuous SiC fiber reinforced titanium matrix composites

Analysis of Interfacial Behavior in Titanium Matrix Composites by Using the Finite Element Method (Scs-6/Ti55)

Study of Interfacial Stress Distribution in SiC Fiber Reinforced Titanium Matrix Composites on Transverse Tensile Tests

Microstructure Evolution of Interface and Matrix During the Preparation of SiCf/Ti60 Composites

Hot isostatic pressing of titanium alloy/SiC fiber metal matrix composites

Advances in Sic Fiber Reinforced Titanium Matrix Composites

Matrix microstructure evolution during the fabrication of SiCf/Ti60 composites

Numerical Simulation on Thermal Stresses and Solidification Microstructure for Making Fiber-Reinforced Aluminum Matrix Composites

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

A Combined Investigation of Bending Behavior of a SiC Fiber‐Reinforced Titanium Matrix Composite with Compressive and Tensile Tests

Improving mechanical and thermal expansion properties of aluminum matrix composites reinforced by silicon carbide fiber

Low-cycle Fatigue Behavior and Damage Progression of a Fiber Reinforced Titanium Matrix Composite

Oral/poster reference: icf100247pr

Microstructure and Properties of C-f Reinforced Ti/Al Based Laminated Composites

Micromechanical Analysis of SiC/Ti6Al4V Composite Under Complex Stress State

Microstructure inheritance of matrixes of SiCf/Ti6242 composites from precursor wire coatings by α+β phase field consolidation