Abstract:Calcium treatment is a well established method to transform oxide and sulphide inclusions in steel to less harmful inclusions which can have beneficial effects on properties. Transformation of solid alumina clusters to liquid calcium aluminates by calcium is a much used technique to avoid nozzle blocking in continuous casting of aluminium deoxidised steels. Calcium treatment is also a key method to improve machinability, which can be further improved by increased sulphur content. Resulphurised steels, however, tend to have casting problems due to deficient modification of oxides or formation of solid CaS inclusions which also have a tendency to clog the nozzle. In this study, the formation and transformation of liquid and solid inclusions containing oxidic and sulphidic components were examined by thermodynamic calculations. A quasichemical slag model was applied to calculate equilibrium oxide and sulphide inclusions in steel. Calculations were carried out over a wide temperature range to study the formation of species in the melt corresponding to ladle treatment conditions as well as casting. To examine inclusion behaviour during casting and solidification, the interdendritic solidification model, IDS, was coupled with thermodynamic equilibrium calculations. The results show the conditions in which liquid inclusions can be formed with calcium treatment. The calculations were performed at different temperatures and varying calcium, aluminium and sulphur contents. The effect of total oxygen content was also studied. The main components in liquid calcium aluminates were CaO and Al2O3 plus some SiO2 and CaS. The stability relations of different compounds alter as a function of temperature. An abrupt change occurs during solidification when the partition of the inclusion forming elements between the liquid and solid iron phases are taken into account.

Optimization of Calcium Addition to High-strength Low-alloy Steels

Controlling the Electric Field Characteristics to Suppress the Clogging and Corrosion of the Continuous Casting Nozzle

Optimization of Mold Slag for Continuous Casting of Peritectic Steel

The Effect of Aluminum Addition on the Evolution of Inclusions in an Aluminum-Killed Calcium-Treated Steel

Influence of refining slag composition on nonmetallic inclusions in 38CrMoAl steel

Improvement in Castability of Al-Killed Steel in Billet Casters by Process Optimization

Effect of calcium treatment on evolution of inclusions in low-carbon aluminum-killed steel

Process for improving the castability of aluminum killed continuous cast steel

Study on mechanism of nozzle clogging in slab continuous casting of liquid steel refined by CAS-OB

Influence of Calcium Treatment on Cleanness and Fatigue Life of 60si2mna Spring Steel

Effect of Direct Current Electric Field on the Clogging Behavior of Submerged Entry Nozzle During Casting of UltraLow‐Carbon Steel

Research on the Inclusions of Low Carbon Al-killed Steel Produced by Converter-Continuous Casting Production Route

Research Status of High-Manganese High-Aluminum Steel and Key Points of Continuous Casting

Research on clogging mechanism of tundish submerged nozzle for 38CrMoAl steel

Optimization for Secondary Cooling Parameters in Continuous Casting of High Carbon Chromium Bearing Steel

Improvement in Castability of Al Killed Steel in Billet Casters by Process Optimisation

Analysis of Longitudinal Cracking and Mold Flux Optimization in High-Speed Continuous Casting of Hyper-Peritectic Steel Thin Slabs

Development of control technology and clogging mechanism for tundish nozzle in continuous casting

Abrupt Casting Failures Due to Sub Entry Nozzle Clogging in Calcium Treated Aluminum Killed Steel

Thermodynamic examination of inclusion modification and precipitation from calcium treatment to solidified steel

Control of oxide inclusion for low carbon and low silicon steel