Abstract:To quantify the effect of structural through-thickness reinforcement in foam core sandwich composite panels, an experimental study was carried out which included three-point bending tests, core shear tests, flatwise tensile and compression tests, as well as edgewise compression tests. Standard test procedures based on ASTM guidelines are followed to test the behavior of the stitched panels with reinforcement at 90 degree orientation with respect to the sandwich faces. The test specimens were manufactured by using polyurethane foam Rohacell 71 IG and carbon fiber reinforced composite facesheets. The dry perform facesheets and foam core were then assembled in a dry lay-up already stitched. Kevlar 29 yarn was used to stitch both sets of panels. The results showed a significant effect of the stitching on the in-plane Young’s modulus which was attributed to local displacements of the in-plane fibers and changes in the fiber volume fraction. Stitching of sandwich panels significantly increases the maximum failure loads under flexure, core shear, flatwise tensile, flatwise compression, and edgewise compression loading. A finite element based unit-cell model was developed to estimate the elastic constants of structurally stitched foam core sandwich composite panels taking into consideration the yarn diameter, the stitching pattern and direction as well as the load direction. Depending on these parameters, local changes of the fiber volume fraction as well as regions with undisturbed and disturbed fiber orientations within the laminate plies are taken into account. A good match between the finite element modeling and the experimental data was obtained. The present work should be considered as a step towards developing a more sophisticated numerical model capable of describing mechanical behavior of sandwich structures.

Experimental study on fatigue failure and damage of sandwich structure with PMI foam core

Experimental Study on Fatigue Damage of the Sandwich Structure with PMI Core under Cyclic Displacement Loading

Experimental and Numerical Evaluation of Fatigue Behavior of Foam Core Sandwich Structure

Failure Mechanism of PMI Foam Core Sandwich Beam in Bending

Experimental and Analytical Study on the Mechanical Behavior of Stitched Sandwich Composite Panel with a Foam Core

Experimental and Numerical Evaluation of the Flexural Properties of Stitched Foam Core Sandwich Structure

In Situ Surface Displacement Analysis of Fracture and Fatigue Behaviour under Bending Conditions of Sandwich Beam Consisting of Aluminium Foam Core and Metallic Face Sheets

Fatigue behavior and damage mechanism of aluminum foam sandwich with carbon-fiber face-sheets

FEM Modelling of Single-Core Sandwich and 2-Core Multilayer Beams Containing Foam Aluminum Core and Metallic Face Sheets under Monolithic Bending

Indentation experiment of composite sandwich structure with metal foam core

Three-point bending performances of integral-forming aluminum foam sandwich

Mechanical Properties Test and Failure Analysis of Composite Foam Sandwich Structure in Ramp-Down Zone

Three-point Bending of Physically Asymmetric Metal Sandwich Beams with Aluminum Foam Core: Failure Behavior and Optimal Design

Failure Analysis of Sandwich Beams under Three-Point Bending Based on Theoretical and Numerical Models

Investigation on Low Velocity Impact on A Foam Core Composite Sandwich Panel

Three-point bending behaviors of the foam-filled CFRP X-core sandwich panel: Experimental investigation and analytical modelling

Failure Analysis and Modeling of Foam Sandwich Laminates under Impact Loading

Deformation behavior and mechanical properties of aluminium foam sandwiches under static three-point bending

Deformation and Failure of Hybrid Composite Sandwich Beams with a Metal Foam Core under Quasi-Static Load and Low-Velocity Impact

In Situ Surface Displacement Analysis on Sandwich and Multilayer Beams Composed of Aluminum Foam Core and Metallic Face Sheets under Bending Loading

On low-velocity impact response of foam-core sandwich panels