Abstract:The external piping system which connects power devices, valve control devices, actuators, etc. is an essential system on the aero engine. Under the combined effects of high fluid pressure and external vibration, multiaxial fatigue failure is the main factor that seriously affects the safety of the piping system. The objective of this paper is to establish the multiaxial fatigue life model for the typical welded fuel pipe of the piping system by combining fatigue testing, simulation and theoretical analysis which is of great guiding significance for the engineering application of the piping system. Firstly, the fatigue limits of welded fuel pipes under no and 13.5 MPa internal pressure are obtained by rotational bending fatigue tests using the up-and-down method. Three additional stress levels of rotational bending fatigue tests under no internal pressure are supplemented and then the S-N curve is further obtained by the group method. Since the corresponding fracture surface of the specimens locates at the weld toe near the fixed end, peak stress method is adopted to evaluate the fatigue performance of the weld toe on the pipe specimens. In addition, by comparing the fatigue limit with no and 13.5 MPa internal pressured pipes, it is obvious that the equivalent uniaxial stress corrected by Gerber formula is not applicable for the multiaxial fatigue condition which is caused by the combined effect of fluid pressure and displacement load. The local stress concentration factor caused by the weld toe is determined and based on Findley critical plane model, the multiaxial fatigue life model is established which simultaneously takes the local stress concentration effect, mean stress effect and multiaxial stress effect into consideration. The results of rotational bending fatigue tests under 13.5 MPa internal pressure are within the triple error dispersion band and the accuracy of the proposed life model are verified.

A Structural Stress-Based Critical Plane Method for Multiaxial Fatigue Life Estimation in Welded Joints

A Modified Coffin-Manson Model for Ultra-Low Cycle Fatigue Fracture of Structural Steels Considering the Effect of Stress Triaxiality

Structural stress approach for multiaxial fatigue life estimation of welded structures

Approach for Multiaxial Fatigue Life Assessment of Welded Structures Based on Critical Plane Theory

A novel structural stress approach for multiaxial fatigue strength assessment of welded joints

Multiaxial Fatigue Life Prediction of Tubular K-joints Using an Alternative Structural Stress Approach

Multiaxial Fatigue Life Prediction Based on Damage Mechanics and Critical Plane Method

Fatigue Performance Testing and Life Prediction of Welded Fuel Pipes

Selection Methodology of High-Cycle Fatigue Analysis Approach for Damage Estimation in Welded Structural Joints

Hot Spot Stress Approach For Fatigue Life Assessment In Welded Bridge Connections Using Monitoring Data And Fem Analysis

A Sectional Critical Plane Model for Multiaxial High-Cycle Fatigue Life Prediction

Multiaxial high-cycle fatigue failure and life prediction based on critical plane method

A Practical Method to Predict Total Fatigue Life of Welded Joints Structures

Fatigue Life Assessment of Welded Structures with the Linear Traction Stress Analysis Approach

Multiaxial fatigue life prediction for metals by means of an improved strain energy density-based critical plane criterion

Cyclic elastoplasticity-based life assessment of fatigue crack initiation and subsequent propagation in rib-to-deck welded joints

A Fatigue Life Prediction Approach for Resistance Spot Welded Joints with Consideration of the Stress Ratio Effect

Fatigue Life Assessment Of Welded Structures By Effective Notch Stress Approach

An improved critical plane-energy multiaxial fatigue life prediction model considering shear mean stress

Multiaxial Fatigue Life Prediction Model Based on Critical Plane Approach

Multiaxial fatigue life estimation based on weight-averaged maximum damage plane under variable amplitude loading