Abstract:Distributed acoustic sensing (DAS) in optical fibers detect dynamic strains or sound waves by measuring the phase or amplitude changes of the scattered light. This contrasts with other distributed (and more conventional) methods, such as distributed temperature (DTS) or strain (DSS), which measure quasi-static physical quantities, such as intensity spectrum of the scattered light. DAS is attracting considerable attention as it complements the conventional distributed measurements. To implement DAS in commercial applications, it is necessary to ensure a sufficiently high signal-noise ratio (SNR) for scattered light detection, suppress its deterioration along the sensing fiber, achieve lower noise floor for weak signals and, moreover, perform high-speed processing within milliseconds (or sometimes even less). In this paper, we present a new, real-time DAS, realized by using the time gated digital-optical frequency domain reflectometry (TGD-OFDR) method, in which the chirp pulse is divided into overlapping bands and assembled after digital decoding. The developed prototype NBX-S4000 generates a chirp signal with a pulse duration of 2 μs and uses a frequency sweep of 100 MHz at a repeating frequency of up to 5 kHz. It allows one to detect sound waves at an 80 km fiber distance range with spatial resolution better than a theoretically calculated value of 2.8 m in real time. The developed prototype was tested in the field in various applications, from earthquake detection and submarine cable sensing to oil and gas industry applications. All obtained results confirmed effectiveness of the method and performance, surpassing, in conventional SM fiber, other commercially available interrogators.

Automated Acoustooptic Measurement System of Bulk Acoustic-Waves Launched from an Idt

Coherent OTDR Based Ultra-High Sensitive Acoustic Sensor Assisted with Distributed Microstructured Optical Fiber(DMOF) and Hollow Cylinder Transducer

A Real-Time 3-D Underwater Acoustical Imaging System

Acousto-Optic Bragg Diffraction by Deep Bulk Acoustic Waves for Use in Optic Spectrum Analyser

An Observation Instrument for Artificial Upwelling Based on Coastal Acoustic Tomography

Fast Surface Measurement Using Wavelength Scanning Interferometry with Compensation of Environmental Noise

Integrated Software for Image Processing in Radio Frequency Surface and Bulk Acoustic Wave Laser Probe System

Simultaneously Measuring Thickness, Density, Velocity and Attenuation of Thin Layers Using V(z,t) Data from Time-Resolved Acoustic Microscopy.

A Wideband MIMO Underwater Acoustic Communication Experimental System

Optic-Spectrum Analyzer Using DBAW Acousto-Optic Deflector

Development of Integrated Acoustic Communication and Positioning System for Operation of Autonomous Underwater Vehicles and a Sea Trial

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

Phase-sensitive and fast-scanning laser probe system for radio frequency surface/bulk acoustic wave devices

Development of a High-Speed, Phase-Sensitive Laser Probe System for RF Surface Acoustic Wave/bulk Acoustic Wave Devices with an Absolute Vibration Amplitude Measurement Function

Optical fiber-based acoustic intensity microphone for high-intensity airborne ultrasound measurement

Self-Contained Vertical Acoustic–Hydrophysical Measuring Systems Mollyusk-19 and Mollyusk-21

Development of Real-Time Time Gated Digital (TGD) OFDR Method and Its Performance Verification

Time-resolved measurement of acoustic density fluctuations using a phase-shifting Mach-Zehnder interferometer

Development of In Situ Acoustic Instruments for The Aquatic Environment Study

Development of interactive digital scientific acoustic systems for monitoring and assessment of physical and biological variables from ocean observatory platforms

High-Speed Laser Probing System for Surface Acoustic Wave Devices Based on Knife-Edge Method