Abstract:This paper discusses the pulse signal of a highly sensitive lateral deformable optical microelectromechanical systems (MEMS) displacement sensor based on Wood's anomalies and its corresponding tolerance. The optical reflection amplitude of the device changes with the displacement of the nanostructured grating elements. Unexpectedly, the device's original sinusoidal signal develops into a new signal form (i.e., a pulse signal), when the air gap between the two layers of gratings decreases. Since the slope of the pulse signal, namely 2.5%/nm (i.e., 0.65 dB/nm), is eight times higher than that of the original signal form, namely 0.3%/ nm (i.e., 0.03 dB/nm), the sensitivity of the structure improves by eight times. However, this device is very sensitive to parameters such as its wavelength, period, duty ratio, and air gap. In this paper we used rigorous coupled wavelength analysis (RCWA) to analyze and optimize the respective influence of each parameter on the device's performance. We have introduced two methods to search for the optimal setting and have demonstrated the optimal settings of different incident lights. The simulation results indicate that it is close to 85% possible to achieve an actual device with the highest slope superior to 0.5%/nm and it is 64% possible that the highest slope of an actual device falls in the interval ranging from 1.0%/nm to 2.0%/nm. All the simulated data helped us better understand the tolerance of the pulse signal and guide us toward the development of an actual device. (C) 2015 Optical Society of America

Optic-Spectrum Analyzer Using DBAW Acousto-Optic Deflector

Acousto-Optic Bragg Diffraction by Deep Bulk Acoustic Waves for Use in Optic Spectrum Analyser

Highly Sensitive Lateral Deformable Optical MEMS Displacement Sensor: Anomalous Diffraction Studied by Rigorous Coupled-Wave Analysis.

Double acousto-optic deflector system for increased scanning range of laser beams

Flexible High-Resolution Wavefront Sensor Using a Double-Frequency Two-Dimensional Acousto-Optic Modulator

Automated Acoustooptic Measurement System of Bulk Acoustic-Waves Launched from an Idt

Scanning Beam Collimation Method for Measuring Dynamic Angle Variations Using an Acousto‐optic Deflector

Hexagonal Serrated Electrode for High Energy Efficiency and Large Bandwidth Acousto-Optic Deflector

The Wideband Design of Anisotropic Acousto-Optic Deflector under Different Frequency Bands

High-speed K-Linear Swept Laser Using Acousto-Optic Deflectors with Doppler Shift Compensation for Optical Coherence Tomography.

Exact optical path difference and complete performance analysis of a spectral zooming imaging spectrometer

Liquid-Crystal-Based Fourier Optical Spectrum Analyzer Without Moving Parts

Experimental Trials With The Optical Differentiation Wavefront Sensor For Extended Objects

Linear-in-wavenumber swept laser with an acousto-optic deflector for optical coherence tomography.

Research on the Broadband Operating Mode of Anisotropic Acousto-Optic Deflector Using Tellurium Dioxide Crystal

Optimum Quasi-Optical System Synthesis with Enhanced Depth-of-Field for Cross-Range Refocusing Terahertz Defog Camera

Theoretical Investigation on Broadband THz Deflectors for Femtosecond Electron Beam Diagnostics

Design of a broadband acousto-optic filter using bulk acoustic wave beam steering with an interdigital transducer

Development of Fast-Scanning Laser Probe System Based on Knife-Edge Method for Diagnosis of Rf Surface Acoustic Wave Devices

High-speed 2D Beam Steering Based on a Thin-Film Lithium Niobate Optical Phased Array with a Large Field of View

High-resolution W-band ISAR Imaging System Utilizing a Logic-Operation-based Photonic Digital-to-analog Converter