Abstract:Motivated by the magnitude of discrepancies that are typically encountered in blind analysis contests between numerical model predictions and test data, a methodology is presented to incorporate modeling uncertainties in the assessment of capacity-designed steel moment-resisting frames (MRFs) under earthquake loading. Sources of modeling uncertainties are identified in order to define a set of variables that control the seismic response of steel MRFs. For each variable, statistical distributions that rely on experimental databases are deduced. Special attention is paid to the truncation limits to enable the generation of individual parameter samples that have an actual physical meaning. Besides strength modification factors for various steel grades, distributions are offered for the parameters that are used to model wide-flange (composite) beams, steel hollow structural section columns and damping. Both intracomponent and intercomponent interdependencies are explicitly discussed in an attempt to propose correlation coefficients that comply with the current design philosophy and construction sequence. Although the focus is strictly on collapse of capacity-designed steel MRFs, the proposed methodology can be utilized to examine less severe limit states and/or existing structures where capacity-design principles do not necessarily apply. A 4-story steel MRF, tested full-scale at the E-Defense facility to collapse, is employed as a case study to demonstrate the applicability of the proposed methodology. It is shown that although the steel MRF examined is insensitive to modeling uncertainties regarding both collapse and story mechanism prediction, local response parameters can vary considerably versus the ones observed during the test. Through a parametric investigation on the strong-column-weak-beam (SCWB) ratio, the parameters that have an impact on the associated predictions are identified. Implications for capacity design, collapse capacity and residual drift are also discussed, highlighting the benefits that higher SCWB ratios can have on seismic response.

Numerical simulation on seismic collapse of thin-walled steel moment frames considering post local buckling behavior

Fiber-based Approach for Seismic Analysis of Steel Members Using Finite Particle Method

Numerical Studies on Full-Scale Steel Columns under Complex Seismic Loading

Inelastic Storey-Buckling Factor of Steel Frames

Collapse Test of Three-Story Half-Scale Reinforced Concrete Frame Building

Collapse tests of RC frame with sudden middle column removal

NUMERICAL SIMULATION OF FAILURE BEHAVIOR OF REINFORCED CONCRETE FRAME STRUCTURES BY DISCRETE ELEMENT METHOD

Numerical evaluation on collapse-resistant performance of steel-braced concentric frames

Application of Steel Equivalent Constitutive Model for Predicting Seismic Behavior of Steel Frame

Numerical Modelling of the Progressive Collapse of Reinforced Concrete Frames with Different Lateral Restraints

Numerical Simulation for the Progressive Collapse of Concrete Building due to Earthquake

Incorporating Modeling Uncertainties in the Collapse Assessment of Capacity-Designed Steel Moment Frames under Seismic Loading

Materials Constitutive Analysis on Local Buckling Damage Description of Steel Frame Members

Multilinear model for progressive collapse response of reinforced concrete frames under penultimate column removal scenario

Collapse simulation of reinforced concrete high-rise building induced by extreme earthquakes

Experimental Study and Numerical Model Calibration for Earthquake-Induced Collapse of Rc Frames with Emphasis on Key Columns, Joints, and the Overall Structure

Quantitative investigation on collapse margin of steel high-rise buildings subjected to extremely severe earthquakes

Simulation of Structural Collapse with Coupled Finite Element-Discrete Element Method

Fiber-based computational modeling of rectangular double-skin concrete-filled steel tubular short columns including local buckling

Collapse Simulation for a SuperTall Mega-braced Frame Core-tube Building

Elasto-plastic analysis for a steel frame-core wall structure with an eccentric tube