Abstract:In central hot-spot ignition of inertial confinement fusion (ICF), a spherical capsule containing deuterium-tritium (DT) fusion fuel is imploded to a much smaller sphere so as to achieve high fuel density and high temperature in the central hot spot, triggering ignition and producing significant thermonuclear output. Low-adiabat (entropy) implosions maximize the fuel compression. Unfortunately, experiments on the National Ignition Facility has demonstrated that the hydrodynamic instability, which leads to hot-spot deformation, main-fuel-layer distortion and ablator mixing into the hot spot, is much prominent than expected [1]. High-foot high-adiabat implosions, with higher ablation velocities and larger density gradient scale lengths, are designed to reduce ablation-front Rayleigh-Taylor instability induced mixing of ablator material into the DT hot spot [2]. Nevertheless, the laser energy required for ignition is approximately proportional to the square of the fuel adiabat, and it seems hard to design a high-adiabat ignition target for the current mega joule laser facilities. In this report, we propose a design of a wedged-peak-pulse at late stage of the indirect drive, for a medium fuel adiabat. First, during the wedged-peak-pulse the radiation drive grows gradually creating a series of compression waves which compress the fusion fuel without significantly raising the fuel adiabat. Second, the compression waves merges as they travel into the hot spot forming a strong inward shock wave or compression wave, which prohibits the reflection of the outward rebounding shock (from the spherical center) at the interface of the hot spot and main fuel layer, thus stabilizing the deceleration stage hydrodynamic instability. With the wedged-peak-pulse, the fuel adiabat is kept at reasonable value such that the one-dimensional (1D) performance of the capsule is better than that of the high-foot implosions and comparable to that of the low-foot implosions. Meanwhile, the hydrodynamic instability, at both the ablator/fuel interface and hot-spot/main-fuel interface, are significantly reduced as compared with low-foot implosions. Simulations with the LARED-JC code indicate that the wedged-peak pulse is achievable with a (cylinder) hohlraum driven by a laser facility with energy of ~2.0MJ. Moreover, our scheme is also robust with respect to the maximum radiation temperature. We expect that the new type of design would be a good way for indirect-drive ICF on mega-joule laser facilities.

Design of an Indirect-Drive Pulse Shape for ∼1.6 MJ Inertial Confinement Fusion Ignition Capsules

A wedged-peak-pulse design with medium fuel adiabat (entropy) for indirect-drive fusion

A new ignition scheme using hybrid indirect-direct drive for inertial confinement fusion

A wedged-peak-pulse design with medium fuel adiabat for indirect-drive fusion

Main Drive Optimization of a High-Foot Pulse Shape in Inertial Confinement Fusion Implosions

Indirect-direct hybrid-drive work-dominated hotspot ignition for inertial confinement fusion

Design of laser pulse shapes and target structures by random optimization for direct-drive inertial confinement fusion

A Hybrid-Drive Nonisobaric-Ignition Scheme For Inertial Confinement Fusion

Model Optimization of Infrared Homogenization for Inertial Confinement Fusion Cryotargets

Design of a Peanut Hohlraum with Low Gas-Fill Density for the Laser Megajoule

Hybrid-drive pressure suppressing implosion instabilities and offering nonstagnation hotspot ignition with low convergence ratio for high-gain inertial fusion

A new ignition hohlraum design for indirect-drive inertial confinement fusion

Laser pulse shape designer for direct-drive inertial confinement fusion implosions

Reduction of the deceleration phase to mitigate the negative effect of hydrodynamic instabilities in direct-drive ICF implosions

Shock-ignition effect in indirect-drive inertial confinement fusion approach

Optimization of target compression for high-gain fast ignition via machine learning

Experimental confirmation of driving pressure boosting and smoothing for hybrid-drive inertial fusion at the 100-kJ laser facility

Improved Ion Heating in Fast Ignition by Pulse Shaping

Efficient energy transport throughout conical implosions

Driver at 10 MJ and 1 shot/30min for inertial confinement fusion at high gain: efficient, compact, low-cost, low laser-plasma instabilities, beam-color selectable from 2 omega/3 omega/4 omega, applicable to multiple laser fusion schemes

Experimental confirmation of drive pressure boosting and smoothing for hybrid-drive inertial fusion at the 100-kJ laser facility