Abstract:Fresh fruit micro-rupture generally occurs during mechanical handling, which severely affects the product's postharvest quality along the supply chain. An extended finite element (XFEM) model was developed for investigating the fracture mechanical response of tomato fruit under postharvest mechanical compression. A 1/4 tomato fruit was modeled using three parts: exocarp, mesocarp and septa frame, and pre-crack. An amplitude curve-based uniformly distributed pressure load was applied over the internal surface of the locule for replacing the pressure change of the liquid in the fruit locule during compression simulation. The XFEM-based cohesive segments method in conjunction with Phantom nodes was used to simulate the initiation and propagation of the pre-crack in the fruit model. It was assumed that the fruit tissues were linear elastic and ideally brittle solid materials before fracture, the tissue fracture energy was independent of the size and geometry of the cracked tissue specimen, the tissue fracture response met a linear elastic traction-separation behavior, the crack initiation followed the maximum principal stress criterion and the crack evolution followed a linear softening law and a mode-independent and energy-based fracture criterion. The peak force applying over the locule surface was predicted as 0.02 MPa when the crack of the fruit virtually started to propagate. The XFEM model was found to be capable of reproducing the compression force-percentage deformation behavior as well as crack propagation of a tomato fruit in compression up to 28 % deformation with an average relative error was about 8 %. Both XFEM simulation and experiment data showed a rapid pre-crack propagation the percentage deformation was more than 20 %. Furthermore, the propagation length of the crack in the fruit model was sensitive to the peak pressure in the locule and the fracture mechanics (e.g., elastic modulus, Poisson's ratio, failure stress, fracture energy) of the exocarp and mesocarp. This study demonstrates the application of XFEM as a novel tool to understand how fruit rupture under mechanical loading when the fruit mechanics varies at different conditions (e. g., ripeness), and the extent of crack propagation which are important for improving or developing new mechanical handling technologies.

Mechanical Properties of Tomato Exocarp, Mesocarp and Locular Gel Tissues

Internal mechanical damage prediction in tomato compression using multiscale finite element models

Effect of tomato internal structure on its mechanical properties and degree of mechanical damage

A Multiscale Finite Element Model for Mechanical Response of Tomato Fruits

Differences in the cell morphology and microfracture behaviour of tomato fruit (<i>Solanum lycopersicum</i> L.) tissues during ripening

Viscoelastic-plastic Behavior of Single Tomato Mesocarp Cells in High Speed Compression-Holding Tests

Effect of Number of Locules, Loading Position, and Compression Speed on the Mechanical Behaviors of Tomato Fruits

An extended finite element model for fracture mechanical response of tomato fruit

Prediction of the Cracking Susceptibility of Tomato Pericarp: Three-point Bending Simulation Using an Extended Finite Element Method

Multi-scale engineering properties of tomato fruits related to harvesting, simulation and textural evaluation

Physical and Mechanical Properties of Tomato Fruits As Related to Robot’s Harvesting

Analysis of the Correlation Between Mesocarp Biomechanics and Its Cell Turgor Pressure: A Combined FEM-DEM Investigation for Irrigation-Caused Tomato Cracking

Mechanical Properties of Maize Kernel Horny Endosperm, Floury Endosperm and Germ

Thermo-biomechanical Coupling Analysis for Preventing Tomato Fruit Cracking During Ripening

Mathematical modelling of mechanical damage to tomato fruits

Effect of mechanical damage on mass loss and water content in tomato fruits

Multiscale Biomechanics of Tomato Fruits: A Review

Dynamic Compressive Stress Relaxation Model of Tomato Fruit Based on Long Short-Term Memory Model

The Effect of Compressibility, Loading Position and Probe Shape on the Rupture Probability of Tomato Fruits

Response of tomato fruit to consecutive impact loading

MECHANICAL MODEL OF CERASUS HUMILIS ESTABLISHED BY UNIAXIAL COMPRESSION PHYSICAL TEST AND VIRTUAL SIMULATION