Abstract:Squeezing, collision, friction and other behaviors are widely present in the post-harvest processing operations of bananas, such as field picking, de-handing, cleaning, packaging and transportation, which will inevitably cause a certain degree of mechanical damage to banana fruits. In view of the difficulty in accurately detecting and quantifying fruit damage in the early stage of production, this paper adopted dynamic finite element numerical simulation and multi-parameter optimization of response surface to carry out simulation analysis on the collision behavior of banana fruit in the post-harvest operations, and the accurate assessment and quantitative characterization of fruit damage degree and erosion rule were carried out. The three-dimensional solid model of banana was established by reverse engineering method based on 3D scanning technology. The multi-scale finite element model of banana was further established by combining the constitutive parameters of banana bunch obtained from quasi-static mechanical experiments. In this study, a total of 27 collision systems including different contact materials, collision angles and impact speeds were developed to quantitatively characterize the changing rules of contact force, equivalent stress, energy, damage volume and bruise susceptibility of fruit under different experimental scenarios. An empirical prediction model for banana fruit's bruise susceptibility was established using response surface optimization methodology, and the comprehensive effects of contact material, collision angle and impact speed on fruit damage were obtained. On this basis, three dynamic collision systems including banana hand and impact panel were developed, and the generation region and erosion rule of equivalent stress of banana hand and impact panel under different encounter postures were further investigated. Finally, the physical verification experiments of banana impact and collision were carried out based on the characteristics of banana growth distribution and movement in the actual post-harvest operations. The experimental results showed that the prediction models of bruising susceptibility of banana fruit under different scenarios achieved a prediction accuracy of more than 80%. The residual stress inside the banana hand under Posture_3 is the smallest (2.55e-2 MPa), and the maximum relative error between the predicted value and the experimental value of bruising susceptibility is less than 8.5%. These results indicate that the multi-scale dynamic finite element model and the empirical prediction model of collision system for bananas are reasonable and correct, and the study have certain reference value for the numerical simulation and quantitative characterization of damage degree of other fruits and vegetables.

Viscoelastic-plastic Behavior of Single Tomato Mesocarp Cells in High Speed Compression-Holding Tests

Dynamic Finite Element Simulation of the Collision Behavior and Multi-Parameter Quantitative Characterization of the Damage Degree of Banana Fruit in the Post-Harvest Operations

MECHANICAL MODEL OF CERASUS HUMILIS ESTABLISHED BY UNIAXIAL COMPRESSION PHYSICAL TEST AND VIRTUAL SIMULATION

Softening During Ripening of Ethylene-Treated Fruits in Response to 1-Methylcyclopropene Application

Dynamic Compressive Stress Relaxation Model of Tomato Fruit Based on Long Short-Term Memory Model

The Steady-state Sinusoidal Dynamic Behaviour of Peach and Pear

Effects on Relaxation Properties of Chinese Cabbage (brassica Campestris L.) Subjected to Different Compression Directions

Thermo-biomechanical Coupling Analysis for Preventing Tomato Fruit Cracking During Ripening

Mechanical compressive behavior of pomelo peel and multilayer polymeric film/foam systems

Excess Water Loss Induced by Simulated Transport Vibration in Postharvest Kiwifruit

EVALUATION OF TOMATO QUALITY DURING STORAGE BY ACOUSTIC IMPULSE RESPONSE

A system for studying the effect of mechanical stress on the elongation behavior of immobilized plant cells.

The viscoelastic properties of Nicotiana tabacum BY-2 suspension cell lines adapted to high osmolarity

Consideration of Selected Agricultural Products as Viscoelastic Materials

A wearable conductive hydrogel with triple network reinforcement inspired by bio-fibrous scaffolds for real-time quantitatively sensing compression force exerted on fruit surface

Macroscopic and microscopic investigations of determining elasto‐mechanical properties of limequat fruit

Cell Visco-Elasticity Measured with Afm and Vertical Optical Trapping at Sub-Micrometer Deformations

Comparing the Mechanical Properties of Rice Cells and Protoplasts under PEG6000 Drought Stress Using Double Resonator Piezoelectric Cytometry

Cell Visco-Elasticity Measured with Afm and Optical Trapping at Sub-Micrometer Deformations

Variations in the Biomechanics of 16 Palmar Hand Regions Related to Tomato Picking

Unraveling the molecular mechanisms of melon fruit firmness: insights into cell wall gene expression and regulation