Abstract:Mixing surfactants with whole milk feed before spray drying could be a commercially favorable approach to produce instant whole milk powders in a single step. Pure whole milk powders obtained directly from spray drying often have a high surface fat coverage (up to 98%), rendering them less stable during storage and less wettable upon reconstitution. Dairy industries often coat these powders with lecithin, a food-grade surfactant, in a secondary fluidized-bed drying stage to produce instant powders. This study investigated the changes in wetting behavior on the surface of a whole milk particle caused by the addition of surfactants before drying. Fresh whole milk was mixed with 0.1% (wt/wt) Tween 80 or 1% (wt/wt) lecithin (total solids), and the wetting behavior of the shell formed by each sample was captured using a single-droplet drying device at intermediate drying stages as the shell was forming. The addition of surfactants improved shell wettability from the beginning of shell formation, producing more wettable milk particles after drying. The increase in surfactant loading by 10 times reduced the wetting time from around 30s to <5s. At the same loading of 1% (wt/wt; total solids), milk particles with Tween 80 were much more wettable than those with lecithin (<5s compared with >30s). We proposed that Tween 80 could adsorb at the oil-water interface of fat globules, making the surface fat more wettable, whereas lecithin tends to combine with milk proteins to form a complex, which then competes for the air-water surface with fat globules. Spray-drying experiments confirmed the greatly improved wettability of whole milk powders by the addition of either 0.1% (wt/wt) Tween 80 or 1% (wt/wt) lecithin; wetting time was reduced from 35±4s to <15s. To the best of our knowledge, this is the first time that a dynamic droplet drying system has been used to elucidate the complex interactions between ionic or nonionic surfactants and milk components (both proteins and fat), as well as the resultant effect on the development of milk particle functionality during drying.

Towards spray drying of high solids dairy liquid: Effects of feed solid content on particle structure and functionality

Dairy Milk Particles Made with a Mono-Disperse Droplet Spray Dryer (MDDSD) Investigated for the Effect of Fat

Effects of Co-spray Drying of Surfactants with High Solids Milk on Milk Powder Wettability

Particle Shrinkage and Morphology of Milk Powder Made with a Monodisperse Spray Dryer

A Monodisperse Spray Dryer for Milk Powder: Investigation of Particle Shrinkage and Puffing

Surface composition of industrial spray-dried milk powders. 2. Effects of spray drying conditions on the surface composition

A Monodisperse Spray Dryer for Milk Powder: Modelling the Formation of Insoluble Material

Shrinkage Behaviour of Skim Milk Droplets During Air Drying

High pressure jet spray drying of condensed skim milk results in powders with enhanced interfacial properties

Drying Kinetics of Skim Milk with 50 Wt.% Initial Solids

Solid-state Characterization of Spray-Dried Ice Cream Mixes

Effects of Spray Drying and Freeze Drying on the Structure and Emulsifying Properties of Yam Soluble Protein: A Study by Experiment and Molecular Dynamics Simulation.

Shell-formation Mediated Surface Composition of Uniform Two-Component Microparticles Fabricated by Micro-Fluidic Spray Drying: Effect of Component Size and Solubility

Effects of Ionic and Nonionic Surfactants on Milk Shell Wettability During Co-Spray-drying of Whole Milk Particles

Effect of spray freeze drying on the structural modification and rehydration characteristics of micellar casein powders

The compositional effects of high solids model emulsions on drying behaviour and particle formation processes

Functionality of Milk Protein Concentrate: Effect of Spray Drying Temperature

Effect of surface composition on the flowability of industrial spray-dried dairy powders

Characteristics of Milk Powders Produced by Spray Freeze Drying

Surface composition of industrial spray-dried milk powders. 1. Development of surface composition during manufacture

Spray drying of monodispersed microencapsulates: implications of formulation and process parameters on microstructural properties and controlled release functionality.