Abstract:Efficient conversion of renewable lignin into value-added chemicals and biofuel is of great importance for the sustainable development of biorefineries. However, lignin valorization is highly restricted by its structural variation and complexity. In this regard, we have produced a series of lignins extracted from grass, hardwood, and softwood and focused on scrutinizing their structural variability and key characteristics to provide structural insights into fast and selective production of aromatics. As an energy-efficient approach, microwave-assisted hydrothermal liquefaction without introducing an external oxygen was performed to facilitate the base-catalyzed depolymerization of lignin under moderate conditions. The general applicability of this approach was proved on five different lignins. High yields (58.5–78.6%) of low-molecular-weight bio-oil from all lignins were obtained only after 1 min at 220 °C. In particular, a high ratio of cleavable β–O–4 linkage of grass lignin enabled a fast monomer production, while its specific p-coumaric acid moieties allowed a high monomer selectivity to 4-vinylphenol of 66%. A difference in the product distribution was systematically investigated through a comprehensive analysis of lignin characteristics (e.g., interlinkage, S/G/H unit, and molecular weight) and stability studies of main monomeric products. These results revealed the fast degradation of reactive intermediates (aldehydes and S-type products) and how the monomer’s stability/reactivity affects the selective production. Alongside reaction parameters, several critical factors governing the lignin conversion were further identified by calculating the Pearson correlation coefficient between lignin characteristics and the conversion efficiency. The lignin structure–property–degradability relationships and reaction mechanisms are expounded and updated to foster efficient lignin utilization.

Quantified monophenols in the bio-oil derived from lignin fast pyrolysis

Hydrogenolysis and Hydrodeoxygenation of Lignin in a Two-Step Process to Produce Hydrocarbons and Alkylphenols

A Review on the Catalytic Hydrodeoxygenation of Lignin-Derived Phenolic Compounds and the Conversion of Raw Lignin to Hydrocarbon Liquid Fuels

Microwave-assisted depolymerization of lignin and a biphasic extraction method for the recovery of bio-oil and phenolic monomers

Fast Pyrolysis of Enzymatic/mild Acidolysis Lignin from Moso Bamboo

Bio-oil as a source of renewable chemicals: the chemistry of pyrolytic lignin

Oligomers Obtained from Sequential Fractionation of Lignin Pyrolysis Oil

Effect of Copper Oxide on Fast Pyrolysis of Enzymatic/mild Acidolysis Lignin

Experimental Researches on Milled Wood Lignin Pyrolysis Based on Analysis of Bio-Oil

Products properties from fast pyrolysis of enzymatic/mild acidolysis lignin

Multi-step separation of monophenols and pyrolytic lignins from the water-insoluble phase of bio-oil

Fast and Selective Production of Aromatics via Efficient Lignin Depolymerization: Critical Factors and Mechanism Studies

Valorization of lignin into phenolic compounds via fast pyrolysis: Impact of lignin structure

The pyrolytic degradation of wood-derived lignin from pulping process

Lignin Hydrogenolysis: Phenolic Monomers from Lignin and Associated Phenolates across Plant Clades

Advances in the Pyrolytic Transformation of Lignocellulosic Biomass to Phenol-Enriched Bio-Oil

Selective Production of Phenolic Monomers and Biochar by Pyrolysis of Lignin with Internal Recycling of Heavy Oil

Study on Extracting Phenols from Biomass Fast Pyrolysis Oil

Production of 4-Ethylphenol from Lignin Depolymerization in a Novel Surfactant-Free Microemulsion Reactor

Selective Extraction of Monophenols from Pyrolysis Bio-oil Based on A Novel Three-dimensional Visualization Model

Production of Phenolic-Rich Bio-Oil from Catalytic Fast Pyrolysis of Biomass Over Tailored Fe-Based Catalysts