Abstract:FePO4 nanoparticles, acted directly as cathode materials in lithium ion rechargeable batteries, were synthesized by a microemulsion technique. The various grain-sized and crystal-structured FePO4 samples were obtained by sintering at different temperatures (380°C, 460°C, 550°C, 650°C) for 3h in air. The structure and morphology were investigated by means of X-ray diffraction (XRD) and field emission-scanning electron microscopy (FE-SEM); the electrochemical properties were characterized by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and galvanostatic charge and discharge tests. Results show that FePO4 sintered at 380°C and 460°C for 3h are amorphous, and with fine sizes in the range of 10–20nm. Increasing the sintering temperature leads to an increase in grain size and makes the structure change from amorphous to trigonal. The EIS results show that the Rct value of FePO4 sintered at 460°C is smaller than that sintered at 650°C. The diffusion coefficients of lithium ion (DLi) of FePO4 sintered at 380°C, 460°C, 550°C and 650°C measured by EIS are 8.09×10−14, 1.06×10−13, 4.88×10−14 and 2.59×10−14cm2s−1, respectively. The difference in diffusivity is also confirmed by CV and the DLi values are 6.71×10−14, 8.28×10−14, 4.89×10−14 and 1.60×10−14cm2s−1, respectively. The correlations between the electrochemical performances of FePO4 and lithium ion diffusion are acquired. The charge and discharge tests show that the initial discharge specific capacity of FePO4 sintered at 460°C for 3h reaches 142.3mAhg−1 at 0.1°C. These results suggest that nanoparticles and amorphous FePO4 facilitates lithium ion diffusion during the charge/discharge cycles.

The Effects of Au Loading on the Electrochemical Properties of Fe 1.5 (PO 4 )(OH) Cathode Material for Lithium-Ion Batteries

Li Ion Diffusivity and Electrochemical Properties of FePO4 Nanoparticles Acted Directly As Cathode Materials in Lithium Ion Rechargeable Batteries

Effect of Amorphous FePO4 Coating on Structure and Electrochemical Performance of Li1.2Ni0.13Co0.13Mn0.54O2 As Cathode Material for Li-ion Batteries

Synthesis, morphological analysis and electrochemical performance of iron hydroxyl phosphate as a cathode material for lithium ion batteries

Effect of Lithium Content on LiMnPO4 and Its Electrochemical Property for Lithium Ion Batteries

Synthesis and Electrochemical Performances of Nano-Particle Fepo4 and Ce-Doped Fepo4 Cathode Materials for Lithium Ion Batteries by Microemulsion Method

Influence of Coexisting Li3PO4 on Electrochemical Properties of LiFePO4

Synthesis and electrochemical properties of LiFePO4 cathode material by ionic thermal method using eutectic mixture of tetramethyl ammonium chloride–urea

Influence of Lanthanum Doping on Performance of LiFePO4 Cathode Materials for Lithium-Ion Batteries

High‐Rate and Long‐Life Au Nanorods/LiFePO4 Composite Cathode for Lithium‐Ion Batteries

Enhanced Electrochemical Property of FePO4-coated LiNi0.5Mn1.5O4 As Cathode Materials for Li-ion Battery

Effect of Sintering-method on Electrochemical Performance of LiFePO_4/C Cathode Material

Synthesis of Nano-Sized FePO4 Cathode Material via a Microemulsion Technique

Synthesis of Nano-Sized FePO<sub>4</sub> Cathode Material Via a Microemulsion Technique

Hydrothermal Synthesis and Electrochemical Performance of Nanoparticle Li2FeSiO4/C Cathode Materials for Lithium Ion Batteries

Effect of Electrode Preparation Technology and Electrolytes on the Performance of LiFePO4 Cathode Material for Lithium Ion Battery

Impact of Ph on Morphology and Electrochemical Performance of LiFePO4 As Cathode for Lithium-ion Batteries

High‐Rate and Long‐Life Au Nanorods/LiFePO 4 Composite Cathode for Lithium‐Ion Batteries

Effects of Lithium Content on the Structure and Electrochemical Performance of Spherical Lithium-rich Cathode Materials

Synergetic Effect of the Crystallinity, Particle Size of LiFePO4 and the In-Situ Introduced Fe2P on Its High-Rate Capability

Fine Structure and Electrochemical Performance Investigations of Spherical LiMn0.6Fe0.4PO4/C Cathode Material Synthesized via a Spray-Drying Route at Various Calcination Temperatures