Abstract:Heterogeneous catalysts play a dual role in transesterification due to their advantages of being separable and reusable. In recent years, heterogeneous catalysts derived from renewable resources have received more attention. In this paper, the production of biodiesel from Xanthoceras sorbifolia bunge oil via transesterification was studied under the action of an ILe@Cu@MOF catalyst. Fourier-Transform Infrared Spectroscopy (FTIR), Raman Spectroscopy, scanning electron microscopy (SEM), Energy-Dispersive X-ray Spectroscopy (EDS), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), Thermogravimetric (TG) and other characterization methods were used to characterize the microstructure and thermal stability of the catalyst and further study the ILe@Cu@MOF catalyst for the preparation of biodiesel from Xanthoceras sorbifolia bunge oil. The results show that the surface of the ILe@Cu@MOF catalyst is attached with a sheet-like structure of isoleucine (ILe), which mainly contains Cu, O, C and N elements. The specific surface area is 19.687 m2/g, and the average pore size is 31.74 nm, which belongs to mesoporous material. The pyrolysis temperature of ILe@Cu@MOF reached 360 °C, indicating that the grafting of ILe had a protective effect on Cu@MOF and increased the pyrolysis temperature of Cu@MOF. At the same time, the water contact angle increased from 86° to 121°, and the material was hydrophobic. The optimum conditions for the preparation of biodiesel were as follows: the amount of catalyst was 3 wt%, the molar ratio of methanol to oil was 35:1, the reaction temperature was 50 °C, and the reaction time was 4 h. At this time, the biodiesel yield was up to 82.85%. Moreover, after five cycles of ILe@Cu@MOF, the yield still reached 73.4%. GC–MS and MNR studies showed that the quality of biodiesel after catalysis was higher. The prepared catalyst can make biodiesel products more sustainable, environmentally friendly and economical, and can provide future prospects for the energy utilization of renewable resources.

Carbon-based nanostructured catalyst for biodiesel production by catalytic distillation

Soft-template synthesis of sulfonated mesoporous carbon with high catalytic activity for biodiesel production

Multifunctionalized Ordered Mesoporous Carbon As an Efficient and Stable Solid Acid Catalyst for Biodiesel Preparation

High Performance Catalytic Distillation Using CNTs-based Holistic Catalyst for Production of High Quality Biodiesel

Highly efficient procedure for the synthesis of biodiesel from soybean oil

Magnetic Reusable Acid-Base Bifunctional Co Doped Fe2O3–CaO Nanocatalysts for Biodiesel Production from Soybean Oil and Waste Frying Oil

Modified Ni-Based Metal–Organic Frameworks (Ni-Btc) with High Deoxygenation and Cracking Ability for Production of a Jet Fuel-Range Hydrocarbon Blend at a Low Catalyst Dosage

Ultrasound-assisted dispersion of bifunctional CaO-ZrO 2 nanocatalyst over acidified kaolin for production of biodiesel from waste cooking oil

Synthesis, characterization and application of a novel carbon-doped mix metal oxide catalyst for production of castor oil biodiesel

Improved Conversion of Stearic Acid to Diesel-Like Hydrocarbons by Carbon Nanotubes-Supported CuCo Catalysts

Application of waste derived magnetic acid-base bifunctional CoFe/biochar/CaO as an efficient catalyst for biodiesel production from waste cooking oil

MOF-Derived Co3O4 Nanoparticles Catalyzing Hydrothermal Deoxygenation of Fatty Acids for Alkane Production

Co-Transesterification Of Waste Cooking Oil, Algal Oil And Dimethyl Carbonate Over Sustainable Nanoparticle Catalysts

Preparation of Biodiesel Using S-Mwcnt Catalysts and the Coupling of Reaction and Separation

A novel bimetallic CaFe-MOF derivative for transesterification: Catalytic performance, characterization, and stability

Highly stable heterogeneous catalysts from electric furnace dust for biodiesel production: Optimization, performance and reaction kinetics

Biochar carbon nanodots for catalytic acetalization of biodiesel by-product crude glycerol to solketal: process optimization by RSM and life cycle cost analysis

Well-defined core-shell nanostructural block copolymer supported recyclable Bronsted acidic ionic liquid catalyst for the synthesis of biodiesel

Selective production of high-value fuel via catalytic upgrading of bio-oil over nitrogen-doped carbon-alumina hybrid supported cobalt catalysts

Efficient Preparation of Biodiesel Using Sulfonated Camellia oleifera Shell Biochar as a Catalyst

Preparation of ILe@Cu@MOF Catalyst and Its Application in Biodiesel Catalysis