Abstract:The radio frequency quadrupole (RFQ) accelerator is a common linear accelerator placed directly after the ion source for low energy ion acceleration. In 1994 and 1999, the RFQ research group of Peking University, led by Academician Chen Jiaer, first proposed and developed the heavy ion integral split ring (ISR) 300 keV N+ and 1 MeV O+ RFQ accelerators. Because of the simultaneous transverse focusing and longitudinal bunching in a cavity, an RFQ accelerator is considered to be the most suitable linear accelerator for the acceleration of low energy and high current beams. However, a long RFQ cavity will decrease the efficiency of RF power. To improve the acceleration efficiency of ions, separated-function radio frequency quadrupole (SFRFQ) was proposed for the first time, and the prototype of the structure was developed and the beam experiments were completed. A new idea of accelerating positive and negative ions simultaneously using RFQ accelerators was proposed for the first time. The process of beam bunching and acceleration of positive and negative ions was simulated and the microscopic beam waveforms of positive and negative oxygen ions were observed successfully with a coaxial fast Faraday cup. Beam experiments were completed on two existing RFQ accelerators. The equipartitioned design scheme of RFQ is developed, and the first neutron imaging facility based on RFQ (Peking University Neutron Imaging Facility, PKUNIFTY) is developed in China. The four-rod D+ RFQ accelerator is the one with the highest frequency in the world so far. In cooperation with the Institute of High Energy Physics of the Chinese Academy of Sciences and the China Institute of Atomic Energy, the 352 MHz proton RFQ model cavity was developed, which effectively boosted the development of China's first proton ADS RFQ accelerator, and won the Beijing Science and Technology Achievement Award in 2008. Peking University and Institute of Modern Physics of the Chinese Academy of Sciences have designed and built a high charge state heavy ion U-238(34+) CW RFQ accelerator, which has successfully accelerated many kinds of heavy ion beams and has been in stable operation for 8 years. In cooperation with Institute of Modern Physics of the Chinese Academy of Sciences, the world's first 162.5 MHz window-type RFQ accelerator was developed, and the CW H-2(+) current intensity was successfully accelerated to 1.95 mA, and the transmission efficiency was 90%. In cooperation with Southwestern Institute of Physics, a 162.5 MHz D+ four-vane RFQ accelerator was designed and tested, beam experiments on the RFQ accelerator indicated that the maximum accelerated beam current could reach 10 mA with a duty factor of 1%. The development direction of RFQ accelerators in the future is the high power accelerators with high current intensity and high duty factor. The above work lays a good foundation for the development of high power RFQ accelerators. High current continuous wave radio quadrupole accelerator (CW RFQ) is widely used as an injector in many big science projects, such as accelerator driven sub-critical clean nuclear energy system (ADS), isotope separation online analysis, International Fusion Materials Irradiation Facility (IFMIF). The most common component of accelerating the low energy segment is also widely used as an independent accelerator application device, it has a very broad application prospect in neutron imaging, boron neutron capture for cancer treatment (BNCT) and other fields.

ACCELERATORS Study of a magnetic alloy-loaded RF cavity for bunch compression at the CSR

Study of a magnetic alloy-loaded RF cavity for bunch compression at the CSR

Design of the Deceleration Magnetic Alloy Cavity for a High-Intensity Heavy-Ion Accelerator Facility Spectrometer Ring

Stable Acceleration of a LHe-Free Nb3Sn demo SRF e-linac Based on Conduction Cooling

Design and Test of an RF Acceleration System Loaded with Magnetic Alloy for the Proton Synchrotron of the Xi’an Proton Application Facility

CW RFQ design and investigation for multi-charge-state acceleration of radioactive beams from BISOL

RFQ Accelerator Research and Innovation Practice at Peking University

The heavy ion cooler-storage-ring project (HIRFL-CSR) at Lanzhou

Injection method of barrier bucket supported by off-aligned electron cooling for CRing of HIAF

Dielectronic recombination experiments at the storage rings: From the present CSR to the future HIAF

Power Test of the Separated Function RFQ Accelerator

Study of magnetic alloy cores for HIRFL-CSRm compressor cavity

Coupling Design of Combined Function Bending Magnet and High Current Electron Beam for 100 Kw Irradiation Accelerator

Tuning and Cold Test of A Four-Vane Rfq with Ramped Inter-Vane Voltage for the Compact Pulsed Hadron Source

Innovative research and development activities on high energy and high current isochronous proton accelerator

Stable Acceleration of a LHe-Free Nb 3 Sn demo SRF e-linac

R&D STATUS OF A 3.5MEV RFQ ACCELERATOR FOR ADS STUDY IN CHINA

Design of a CW BISOL RFQ for Three Kinds of High-Charge-State Ions Simultaneous Acceleration

Study of high pressure gas filled RF cavities for muon collider

Experimental Studies on the Acceleration of Positive & Negative Ions with a Heavy Ion ISR RFQ

The beam commissioning of a CW high charge state heavy ion RFQ