Abstract:Electron beam probe (EBP) is a new principle detector, which makes use of a low-intensity and low-energy electron beam to measure the transverse profile, bunch shape, beam neutralization and beam wake field of an intense beam with small dimensions. While can be applied to many aspects, we limit our analysis to beam distribution reconstruction. This kind of detector is almost non-interceptive for all of the beam and does not disturb the machine environment. In this paper, we present the theoretical aspects behind this technique for beam distribution measurement and some simulation results of the detector involved. First, a method to obtain parallel electron beam is introduced and a simulation code is developed. And then, EBP as a profile monitor for dense beam is simulated using fast scan method under various target beam profile, such as KV distribution, waterbag distribution, parabolic distribution, Gaussian distribution and halo distribution. Profile reconstruction from the deflected electron beam trajectory is implemented and compared with the actual one, and an expected agreement is achieved. Furthermore, Instead of fast scan, a slow scan, i.e. step-by-step scan, is considered, which lows the requirement for hardware, i.e. Radio Frequency deflector. we calculate the three dimensional electric field of Gaussian distribution and simulate the electron motion under this field. In addition, fast scan along the target beam direction and slow scan across the beam is also presented, and can provide a measurement of longitudinal distribution as well as transverse profile simultaneously. Final, simulation results for China Accelerator Driven Sub-critical System (CADS) and High Intensity Heavy Ion Accelerator Facility (HIAF) are given to investigate the quantitative behavior of EBP.

Measurement of power density distribution and beam waist simulation for electron beam

Beam distribution reconstruction simulation for electron beam probe

A method of bunch by bunch measurement at nanoseconds interval by using cavity beam position monitors

Three methods for high density and high current electron beam brightness measurement

Simulation study of electron beam divergence and its distribution measurement

Electron Beam Density Study Using a Portable Slit Imaging System at the Shanghai Electron Beam Ion Trap

Versatile Beam Forming with Concentric Excitations Based on Multiple Weighted Sinc or Bessel Function Distribution

A PROPOSAL FOR THE MEASUREMENT OF THE REAL EMITTANCE OF THE BEAM IN CYCLIC ACCELERATORS

In Situ Monitoring of Beam Current in Electron Beam Directed Energy Deposition Based on Adsorbed Electrons

2-D Low Energy Electron Beam Profile Measurement Based on Computer Tomography Algorithm with Multi-Wire Scanner

A New Measurement Of Electron Beam Emittance With Cerenkov Radiation "Double Imaging" Method

An Emittance Measurement Device for a Space-Charge Dominated Electron Beam

Experiment for Evaluating a K -Band Space TWT Electron Beam

Energy Density Distribution and Temperature Closed-Loop Control in Electron Beam Processing

Development of 1.3 GHz Medium-β (β = 0.634) Disk-Loaded Deflecting Cavity for 150 Kev Electron Beam

Electron beam profile measurement using enhanced dual-techniques in high heat flux test facility at Institute for Plasma Research

Applying Fully Convolutional Networks for Beam Profile and Emittance Measurements

A High Resolution Spatial-temporal Imaging Diagnostic for High Energy Density Physics Experiments

Transverse beam envelope measurements and the limitations of the 3-screen emittance method for space-charge dominated beams

Automated pinhole-aperture diagnostic for the current profiling of TWT electron beams

Development of High Intensity Beam Emittance Measurement Unit