Abstract:This study presents the synthesis and characterization of barium hexaferrite (BaFe 12 O 19 ) powders via the Pechini method, employing controlled pH conditions (pH = 1) followed by sintering at temperatures ranging from 800 °C to 1150 °C. Structural and magnetic properties of the samples were investigated using various techniques, including Vibrating Sample Magnetometry, X-ray Diffractometry, and Scanning Electron Microscopy. Additionally, a theoretical analysis was conducted to determine the critical size required for achieving a single magnetic domain in the material. The results reveal a correlation between synthesis temperature and crystal size, ranging from 76 nm (at 800 °C) to 632 nm (at 1150 °C). Notably, samples sintered at 1050 °C exhibited exceptional magnetic properties, displaying a saturation magnetization (Ms) of 75.1 emu/g, a remanent magnetization (Mr) of 36.7 emu/g, and a coercivity (Hc) of 5.65 kOe. The particle size of these samples measured 327 nm, closely aligning with the critical diameter calculated for barium hexaferrite (378 nm) in this study. This optimal critical size was identified in sample sintered at 1050 °C, resulting in notably high coercivity values compared to those reported in previous literature. These findings highlight the significance of synthesis temperature control in tailoring the magnetic properties of barium hexaferrite, offering insights into optimizing its performance for various applications.

Synthesis of Barium Hexaferrite by Hydrolysis of Barium Acetate and Tris (acetylacetonate) Iron.

Synthesis of Co-Substituted Barium Hexaferrite by Hydrolysis of Organometallic Compounds

Synthesis and Properties of Barium Ferrite Nano-Powders by Chemical Co-Precipitation Method

Improving the Magnetic Properties of Hydrothermally Synthesized Barium Ferrite

Synthesis and Magnetic Properties of Bafe12o19 Hexaferrite Nanoparticles by A Reverse Microemulsion Technique

Solvent-free synthesis of hexagonal barium ferrite (BaFe 12 O 19 ) particles

Cost-effective integrated strategy for the fabrication of hard-magnet barium hexaferrite powders from low-grade barite ore

Preparation and Magnetic Properties of Barium Hexaferrite Nanoparticles Produced by the Citrate Process

Compositional Control and Millimeter Wave Properties of Micro-/Nano-Sized M-Type Barium Hexaferrite Bafe12o19 Synthesized by Hydrothermal Method

Optimization of magnetic properties: Investigating the interaction of synthesis temperature, particle size, and monodomain formation in barium hexaferrite synthesized by the Pechini method

Submicron Barium Hexaferrite Ceramics Manufactured by Low-Temperature Liquid-Phase Sintering of BaFe12O19 Nanoparticles

Effect on Structural, Morphological, and Magnetic Hysteresis of Ni2+–Zr4+ Co-Substituted Barium Hexaferrites by Hydrothermal Synthesis

Hydrothermal processings to produce magnetic particulates

Very Thin Barium Ferrite Particles Prepared by A Novel Technique: Ion Exchange Resin Method

An Ultrafine Barium Ferrite Powder of High Coercivity from Water-In-Oil Microemulsion

Structural and Magnetic Properties of Nanosized Barium Hexaferrite Powders Obtained by Microemulsion Technique

Synthesis of Barium Ferrite Ultrafine Powders by a Sol–gel Combustion Method Using Glycine Gels

Study of Structural Features and Thermal Properties of Barium Hexaferrite Upon Indium Doping

LOW-TEMPERATURE SYNTHESIS OF BARIUM TITANITE IN AQUEOUS SOLUTION

Magnetic Properties of Barium Ferrite Prepared by Hydrothermal Synthesis

Synthesis of M-Hexaferrites Material Based on Natural Iron Sand with Metal Co Doping Using the Coprecipitation Method