Abstract:One of the core requirements for the further maturity in microfluidics is to develop a fluid actuation method in bubble-free and power-efficient manner. Although kinds of active and passive fluid control techniques have been described over the past several decades, complex microfluidic systems still require bulky or energy-inefficient actuation components and simpler systems lack the functionality required for a simple field diagnostic test. Here a novel microfluidic pumping strategy is reported which utilizes the high air permeability of silicone materials to actuate fluid flow, named as Microfluidic Sample Isolated Pumping (μSIP). The key elements of μSIP are two channel networks, the fluidic channel and the degas channel, isolated by selective barriers and located in close proximity to each other. The selective barriers allow gas to pass through while being inaccessible for aqueous liquids due to low surface energy of the porous material. An air concentration gradient across the two networks generates an in-situ diffusive flux out of the fluidic channel. It results in fluidic channel pressure reduction which drives the liquid solution into the fluidic channel while the solution being kept isolated from the surrounding degas channels by the selective barrier. To understand the physics behind μSIP, theoretical analysis and experimental characterizations were performed, the experimental data could be well illustrated and predicted by the developed theories and also average flow velocities in the range of 0.7 to 7 mm/s were observed with the current designs. The μSIP provides tunable, reproducible, and bubble-free microfluidic pumping without any auxiliary equipment or device pre-treatment, providing a powerful liquid handling tool for a broad range of applications.

Microfluidic Reflow Pumps

A self-priming microfluidic diaphragm pump capable of recirculation fabricated by combining soft lithography and traditional machining

Experimental fluid dynamics characterization of a novel micropump-mixer

Microfluidic Solution Isolated Pumping (Μsip)

Syringe-assisted Point-of-care Micropumping Utilizing the Gas Permeability of Polydimethylsiloxane

Microfluidic pumping by micromolar salt concentrations

Experimental Study on a Small Flux, High Pressure Peristaltic Micropump

Concepts for a new class of all-polymer micropumps

Low-power microfluidic electro-hydraulic pump (EHP)

Piezoelectric Peristaltic Micropump Integrated on a Microfluidic Chip

High Performance Electromagnetic Micropump with Bio-Inspired Synchronous Valves for Integrated Microfluidics

A "place N Play" Modular Pump for Portable Microfluidic Applications.

Moving-part-free Microfluidic Systems for Lab-on-a-chip

A Handheld, Wide-Range Pressure Pump for Portable Microfluidic Applications

A Pneumatic Micropump Incorporated with a Normally Closed Valve Capable of Generating a High Pumping Rate and a High Back Pressure

Design of a pump for non-contact micro-reagents dispense

A Continuous, Low-Flow, and Multiplexing Pumping System for Microfluidics Applications

A Controllable and Integrated Pump-enabled Microfluidic Chip and Its Application in Droplets Generating.

A metallic micropump for high-pressure microfluidics

Hand-powered microfluidics: A membrane pump with a patient-to-chip syringe interface

A Digital Acoustofluidic Pump Powered by Localized Fluid-Substrate Interactions