Abstract:China produces and consumes most of coal in the world. This situation is expected to continue within a certain period in the future. Currently, Chinese coal industry is confronted with several serious problems relating to land resource, water resource, environmental, and ecological sustainability. Coal resource exploitation causes the permanent fracture and movement of strata structure, which have caused the fracture and collapse of overlying strata and further led to the subsidence of ground surface as well as the seepage of water in aquifers around the coal seam, which has resulted not only in the loss of land and water resources, but also in serious threats and accidents to underground mining. On the other hand, mining and mineral-processing wastes are one of the world’s long plagued concerns among solid wastes. Coal gangue, as the major waste with a huge amount of discharge, has not only occupied the land, but has also contaminated the ambient land resources and hydrological environment, and further led to ecological system destruction and degradation. What is more, in China there are large amounts of coal—located under railways, buildings, and water bodies—which are unavailable with traditional mining methods. These problems are obviously threaten the concept of green sustainable development. This paper introduces a novel developed solid dense stowing mining method, which is able to significantly reduce or event eliminate the corresponding damages caused by underground mining behavior and realize green and sustainable development. The novelty of this research work is realizing the automation and synchronization of mining and material stowing with an appropriate compaction ratio for adequate support of goaf roof. It can improve the stability of rock strata and the safety and efficiency of underground mining. We also studied and designed a perfect stowing material by using coal gangue and fly ash with appropriate proportions under different particle size gradations. By implementation of the above-mentioned methods in China, the solid dense stowing rate of mined seam areas have reached more than 95% and the overburden strata movements have been reduced to extremely low level which had nearly no damages to above buildings. The solid dense stowing mining method has also realized the reuse and recycling of coal mine solid wastes. Meanwhile, considerable previously unavailable coal resources under buildings, railways, and water bodies have been made available for exploration, which could extend the life of coal mines and increase the sustainability for coal industry and the environment. Ultimately, this method is a reliable way to realize green and sustainable mining. The strata structure protection, the surface subsidence prevention, and coal mine solid waste disposal have been realized at the same time.

In situ investigations into overburden failures of a super-thick coal seam for longwall top coal caving

3-D fracture evolution and water migration in fractured coal under variable stresses induced by fluidized mining: In situ triaxial loading and CT imaging analysis

Dynamic Subsidence Simulation And Topsoil Removal Strategy In High Groundwater Table And Underground Coal Mining Area: A Case Study In Shandong Province

Study on deformation control of overlying strata in short-wall coordinated filling mining of thick coal seam under aquifer

Study on the Laws of Overlying Strata Movement of Repeated Mining of Close Distance Thick Coal Seam Under Large Surface Water

Evolution and control of overburden fracture in extra-thick coal seam mining with hard roofs: ground grouting sealing and case study

Sustainable high-intensity backfill coal mining method: feasibility assessment for ecologically fragile areas of Western China

A Novel In-Seam Borehole Discontinuous Hydraulic Flushing Technology in the Driving Face of Soft Coal Seams: Enhanced Gas Extraction Mechanism and Field Application

Physical simulation study on grouting water plugging of flexible isolation layer in coal seam mining

Experimental Study on the Deformation and Failure Mechanism of Overburden Rock During Coal Mining Using a Comprehensive Intelligent Sensing Method

Green and Sustainable Mining: Underground Coal Mine Fully Mechanized Solid Dense Stowing-Mining Method

Hydraulic horizontal slit-stress synergistic unloading fracturing in coal seams

Paste Backfilling Longwall Mining Technology for Thick Coal Seam Extraction under Buildings and above Confined Aquifers: A Case Study

Effect of super-high water materials backfilling on stress decrease and energy release during strip coal pillar mining: A case study

Safety and high-recovery mechanisms and application research for initial mining of thick-coal-seam with complex structure and thick-hard roof

Ecological-Based Mining: A Coal–Water–Thermal Collaborative Paradigm in Ecologically Fragile Areas in Western China

Permeability Enhancement and Gas Drainage Effect in Deep High Gassy Coal Seams via Long-Distance Pressure Relief Mining: A Case Study

Simulation and On-Site Detection of the Failure Characteristics of Overlying Strata under the Mining Disturbance of Coal Seams with Thin Bedrock and Thick Alluvium

The Spatial Evolution Law and Water Inrush Mechanism of Mining-Induced Overburden in Shallow and Short Coal Seam Group

Innovative solid waste backfilling technology for top coal caving mining: analysing top coal movement and recovery optimisation

Investigating Disaster Mechanisms Triggered by Abrupt Overburden Fracture Alterations in Close-Seam Mining Beneath an Exceptionally Thick Sandstone Aquifer