Abstract:Polydimethylsiloxane (PDMS)-based micropillars (or microcantilevers) have been used as bio-transducers for measuring cellular forces on the order of pN to mu N. The measurement accuracy of these sensitive devices depends on appropriate modeling to convert the micropillar deformations into the corresponding reaction forces. The traditional approach to calculating the reaction force is based on the Euler beam theory with consideration of a linear elastic slender beam for the micropillar. However, the low aspect ratio in geometry of PDMS micropillars does not satisfy the slender beam requirement. Consequently, the Timoshenko beam theory, appropriate for a beam with a low aspect ratio, should be used. In addition, the inherently time-dependent behavior in PDMS has to be considered for accurate force conversion. In this paper, the Timoshenko beam theory, along with the consideration of viscoelastic behavior of PDMS, was used to model the mechanical response of micropillars. The viscoelastic behavior of PDMS was characterized by stress relaxation nanoindentation using a circular flat punch. A correction procedure was developed to determine the load-displacement relationship with consideration of ramp loading. The relaxation function was extracted and described by a generalized Maxwell model. The bending of rectangular micropillars was performed by a wedge indenter tip. The viscoelastic Timoshenko beam formula was used to calculate the mechanical response of the micropillar, and the results were compared with measurement data. The calculated reaction forces agreed well with the experimental data at three different loading rates. A parametric study was conducted to evaluate the accuracy of the viscoelastic Timoshenko beam model by comparing the reaction forces calculated from the elastic Euler beam, elastic Timoshenko beam and viscoelastic Euler beam models at various aspect ratios and loading rates. The extension of modeling from the elastic Euler beam theory to the viscoelastic Timoshenko beam theory has improved the accuracy for the conversion of the PDMS micropillar deformations to forces, which will benefit the polymer-based micro bio-transducer applications.

Investigation of Cellular Contraction Forces in the Frequency Domain Using a PDMS Micropillar-Based Force Transducer

Characterization on the Viscoelastic Property of PDMS in the Frequency Domain

Effect of Loading Rates on Polymer Micropillar Based Force Transducers

Two-Dimensional Analysis of Cross-Junctional Molecular Interaction by Force Probes.

Extension of the Beam Theory for Polymer Bio-Transducers with Low Aspect Ratios and Viscoelastic Characteristics

DOUBLE-SIDED MICROPILLAR ARRAYS FOR CELL CONTRACTION FORCE MAPPING USING OPTICAL MOIRé METHOD

EXTENDED TIMOSHENKO BEAM FORMULA FOR CELLULAR CON- TRACTION FORCE CALCULATION

Microdevice for studying intercellular mechanical transduction

Mechanical characterization of single cells based on microfluidic techniques

Probing cellular traction forces by micropillar arrays: contribution of substrate warping to pillar deflection

Extracting viscoelastic properties of soft polymers from dynamic nanoindentation using an improved model

Video Enhanced Depth-Sensing Indentation Technique for Characterizing Mechanical Behaviour of Biomaterials

Quantification of Cell Traction Force of Osteoblast Cells Using Si Nanopillar-Based Mechanical Sensor

4D Force Detection of Cell Adhesion and Contractility

Development of Micropost Force Sensor Array with Culture Experiments for Determination of Cell Traction Forces.

Visualizing and quantifying dynamic cellular forces with photonic crystal hydrogels

Coupling of static ultramicromagnetic field with elastic micropillar-structured substrate for cell response

Cell Traction Forces Measurement Based on BioMEMS Microposts Matrix

Vision-Based Cellular Force Measurement Using An Elastic Microfabricated Device

Multiphoton photochemical crosslinking-based fabrication of protein micropatterns with controllable mechanical properties for single cell traction force measurements

Neo-Hookean modeling of nonlinear coupled behavior in circular plates supported by micro-pillars